BK1005HS800应用文章市场行情现货热卖使用介绍供应商报价-中国IC网-芯三七

Notice for TAIYO YUDEN productsꢀ

Please read this notice before using the TAIYO YUDEN products.

REMINDERS

■ Product information in this catalog is as of October 2011. All of the contents speciﬁed herein are subject to change

without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-

fore practical application or usage of the Products.

Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-

rating such products, which are caused under the conditions other than those speciﬁed in this catalog or individual

speciﬁcation.

■ Please contact Taiyo Yuden Co., Ltd. for further details of product speciﬁcations as the individual speciﬁcation is

available.

■ Please conduct validation and veriﬁcation of products in actual condition of mounting and operating environment

before commercial shipment of the equipment.

■ All electronic components or functional modules listed in this catalog are developed, designed and intended for

use in general electronics equipment.(for AV, office automation, household, office supply, information service,

telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any

equipment in the ﬁeld such as transportation,( automotive control, train control, ship control), transportation signal,

disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have

direct inﬂuence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.

Do not incorporate the products into any equipment in ﬁelds such as aerospace, aviation, nuclear control, subma-

rine system, military, etc. where higher safety and reliability are especially required.

In addition, even electronic components or functional modules that are used for the general electronic equipment,

if the equipment or the electric circuit require high safety or reliability function or performances, a sufﬁcient reliabil-

ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to

install a protective circuit is strongly recommended at customer's design stage.

■ The contents of this catalog are applicable to the products which are purchased from our sales ofﬁces or distribu-

tors (so called“TAIYO YUDEN’s ofﬁcial sales channel”).

It is only applicable to the products purchased from any of TAIYO YUDEN’s ofﬁcial sales channel.

■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-

cur in connection with a third party's intellectual property rights and other related rights arising from your usage of

products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.

■ Caution for export

Certain items in this catalog may require speciﬁc procedures for export according to“Foreign Exchange and For-

eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.

Should you have any question or inquiry on this matter, please contact our sales staff.

notice_e-01

◦－55～125℃

(BK SERIES)

MULTILAYER CHIP BEAD INDUCTORS

WAVE＊

REFLOW

＊Except for BK0402, BK0603, BK1005, BKH1005

■ FEATURES

■ APPLICATIONS

◦Internal silver printed layer creates a closed circuit which acts as a

◦Hꢀ igh frequency noise countermeasure in personal computers, digital

cameras and other information system products. For use on digital

product clock lines and general signal lines.

magnetic shield minimizing heat generation and crosstalk.

◦No need for grounding provides greater circuit design ﬂexibility.

◦Radiated noise suppression in computer or printer interfaces and har-

ness connectors.

◦Several material types and a broad range of impedance values pro-

vide noise countermeasures for various applications.

◦Noise suppression in video and other AV products.

HS：With low R-XL cross point frequency characteristics and large

resistance part working as damping function, suppresses un-

necessary resonance and keeps signal integrity.

◦Pꢀ revents interference between circuits in cellular phone（s PHS, PDC,

etc.）

HW：With a lower R-XL cross point frequency characteristics than

◦Due to the closed internal circuit which acts as a magnetic shield, the

TS material is extremely effective as a noise ﬁlter on LSI power supply

lines where downsizing of components is needed.

those of HS, strongly suppresses unnecessary resonance.

TS ：Low DC resistance HS version. For power supply lines .

HM：Resistance part rising exceeding from 20MHz. For general us-

age, especially effective for video signal lines.

■ OPERATING TEMP.

HR：Resistance part rising exceeding from 10MHz. For general us-

age, Wider effective range than that of HM.

LM：With larger impedance set at around 200MHz considering for

noise regulation.

LL ：Resistance part steeply rising exceeding from 100MHz. For high

speed signal line, good for clock line, sharply cutting noise off.

◦The small case size lineup with 01005 inch size.

■ ORDERING CODE

B K 1 6 0 8 H S 1 2 1 － T ○

❶

❷

❸

❹

❺

❻

❼

❶Type

Multilayer Chip

Bead Inductor

❷External Dimensions

（L×W）〔mm〕

❸Material

❹Impedance〔Ω〕

example

150

❺Characteristics

Standard Products

❻Packaging

Tape & Reel

HW

HS

HR

ー

T

BK

0402（01005） 0.4×0.2

0603（0201） 0.6×0.3

1005（0402） 1.0×0.5

1608（0603） 1.6×0.8

2125（0805） 2.0×1.25

15

❼Internal code

Standard Products

Multilayer Chip

Bead Inductor

101

102

100

BKH

Refer to impedance

HM curves for material

△

1000

△＝Blank Space

differences

LM

LL

TS

■ EXTERNAL DIMENSIONS/STANDARD QUANTITY

Standard Quantity［pcs］

Paper Tape Embossed Tape

Type

L

W

T

e

＋0.04

ー0.03

0.10

BK0402

0.40±0.02

0.20±0.02

20000

ー

＋0.002

（01005）（0.016±0.001）（0.008±0.001）（0.008±0.001）

（0.004

）

ー0.001

BK0603

（0201）（0.024±0.001）（0.012±0.001）（0.012±0.001）（0.006±0.002）

BK1005 1.00±0.05 0.50±0.05 0.50±0.05 0.25±0.10

（0402）（0.039±0.002）（0.020±0.002）（0.020±0.002）（0.010±0.004）

BKH1005 1.00±0.05 0.50±0.05 0.50±0.05 0.25±0.10

（0402）（0.039±0.002）（0.020±0.002）（0.020±0.002）（0.010±0.004）

BK1608

0.60±0.03

0.30±0.03

0.15±0.05

15000

10000

4000

ー

1.6±0.15

0.8±0.15

0.3±0.2

（0603）（0.063±0.006）（0.031±0.006）（0.031±0.006）（0.012±0.008）

0.85±0.2

＋0.3

2.0

（0.033±0.008）

BK2125

（0805）

ー0.1

1.25±0.2

（0.049±0.008）

0.5±0.3

（0.020±0.012）

＋0.012

1.25±0.2

（0.049±0.008）

（0.079

）

ー0.004

2000

Unit：mm（inch）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

126

■ AVAILABLE MATERIALS

BK0402

BK0603

■

HS type

HM type

HS type

HM type

200

800

700

600

500

400

300

200

100

300

250

200

150

100

50

1000

900

800

700

600

500

400

300

200

100

0

180

160

140

120

100

80

1 121

2 700

3 100

1

2

3

4

5

6

HS601

HS241

HS121

HS800

HS330

HS220

1 121

2 750

1

2

3

4

5

HM601

HM471

HM241

HM121

HM600

1

2

60

3

4

3

4

40

20

5

6

0

1

10

100

1000

10000

1

10

100

1000

10000

Frequency [MHz]

I max=240～540mA

I max=220～260mA

I max=150～500mA

I max=100～200mA

BK1005

■

HS type

HM type

LL type

HW type

1200

1000

800

1600

1400

1200

1000

800

1000

800

1

2

3

4

5

6

7

8

9

HS102

HS601

HS431

HS241

HS121

HS680

HS800

HS330

HS100

1

HW

1

2

3

4

5

6

7

LL121

LL800

LL560

LL470

LL330

LL220

LL100

700

500

300

HM

1

2

3

HW

2

3

600

400

200

0

6 HM750

600

400

4

5

6

7

4

5

400

200

6

200

7

8

9

6

0

1

10

100

1000

10000

Frequency [MHz]

I max=100～200mA

I max=300～500mA

I max=300～1000mA

I max=150～350mA

LL type

LM type

HR type

1

BKH type

2500

2000

1500

1000

500

2500

2000

1500

1000

500

800

3000

2500

2000

1500

1000

500

1

2

3

4

5

6

7

8

LL241

LL181

LL121

LL680

LL470

LL330

LL220

LL100

1

HR601

1

LM182

1 LM182

600

400

200

0

1

2 LM152

2

3

4

5

6

7

8

0

I max=250～600mA

BK1608

I max=120mA

HS type

I max=300mA

HM type

I max=200mA

LL type

■

／

HW type

2000

1000

1

2

3

4

5

6

7

LL241

LL181

LL121

LL680

LL560

LL470

LL300

HW

HS

HM

1

HM

2

3

4

5

6

7

0

I max=300～600mA

I max=300～1500mA

I max=200～350mA

I max=250～500mA

LM type

LL type

TS type

LM

TS

I max=150～200mA

I max=200～300mA

I max=300～400mA

BK2125

■

HS type

HM type

LL type

LM type

HS

LL

LM

HM

I max=300～1200mA

I max=400～800mA

I max=300～600mA

I max=200～400mA

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

127

■ PART NUMBERS

●BK0402

EHS（Environmental

Measuring

frequency

〔MHz〕

Impedance

〔Ω〕

DC resistance

〔Ω〕（max.）

Rated current

〔mA〕（max.）

Thickness

〔mm〕（inch）

Ordering code

Hazardous

Substances

）

BK 0402 HS 100

BK 0402 HS 700

BK 0402 HS 121

BK 0402 HM750

BK 0402 HM121

RoHS

10±5

0.10

0.37

0.53

0.45

0.60

540

280

240

260

220

RoHS

70±25％

120±25％

75±25％

120±25％

0.20±0.02

（0.008±0.001）

RoHS

100

RoHS

●BK0603

EHS（Environmental

Measuring

frequency

〔MHz〕

Impedance

〔Ω〕

DC resistance

〔Ω〕（max.）

Rated current

〔mA〕（max.）

Thickness

〔mm〕（inch）

Ordering code

Hazardous

Substances

RoHS

）

BK 0603 HS 220

BK 0603 HS 330

BK 0603 HS 800

BK 0603 HS 121

BK 0603 HS 241

BK 0603 HS 601

BK 0603 HM600

BK 0603 HM121

BK 0603 HM241

BK 0603 HM471

BK 0603 HM601

BK 0603 LL 100

BK 0603 LL 220

BK 0603 LL 330

BK 0603 LL 470

BK 0603 LL 560

BK 0603 LL 800

BK 0603 LL 121

22±25％

33±25％

80±25％

120±25％

240±25％

600±25％

60±25％

120±25％

240±25％

470±25％

600±25％

10±25％

22±25％

33±25％

47±25％

56±25％

80±25％

120±25％

0.065

0.070

0.40

0.45

0.65

1.20

0.25

0.40

0.80

1.05

1.20

0.25

0.45

0.55

0.70

1.00

1.30

1.50

500

200

150

200

100

200

150

100

0.30±0.03

（0.012±0.001）

100

●BK1005

EHS（Environmental

Measuring

frequency

〔MHz〕

Impedance

〔Ω〕

DC resistance

〔Ω〕（max.）

Rated current

〔mA〕（max.）

Thickness

〔mm〕（inch）

Ordering code

Hazardous

Substances

RoHS

）

BK 1005 HW680

BK 1005 HW121

BK 1005 HW241

BK 1005 HW431

BK 1005 HW601

BK 1005 HS 100

BK 1005 HS 330

BK 1005 HS 680

BK 1005 HS 800

BK 1005 HS 121

BK 1005 HS 241

BK 1005 HS 431

BK 1005 HS 601

BK 1005 HS 102

BK 1005 HR 601

BK 1005 HM750

BK 1005 HM121

BK 1005 HM241

BK 1005 HM471

BK 1005 HM601

BK 1005 HM102

BK 1005 LL 100

BK 1005 LL 220

BK 1005 LL 330

BK 1005 LL 470

BK 1005 LL 680

BK 1005 LL 121

BK 1005 LL 181

BK 1005 LL 241

BK 1005 LM 182

BKH 1005 LM 152

BKH 1005 LM 182

68±25％

120±25％

240±25％

430±25％

600±25％

10±5

33±25％

68±25％

80±25％

120±25％

240±25％

430±25％

600±25％

1000±25％

600±25％

75±25％

120±25％

240±25％

470±25％

600±25％

1000±25％

10±25％

22±25％

33±25％

47±25％

0.17

0.24

0.31

0.50

0.60

0.03

0.06

0.10

0.20

0.30

0.45

0.55

0.58

0.60

0.18

0.30

0.45

0.50

0.70

0.11

0.18

0.25

0.33

0.31

0.45

0.50

0.70

0.90

1.50

2.00

500

450

400

350

300

1000

700

500

400

350

300

350

300

250

150

500

400

350

400

350

300

250

120

200

0.50±0.05

（0.020±0.002）

100

68±25％

120±25％

180±25％

240±25％

1800±25％

1500±25％

1800±25％

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

128

■ PART NUMBERS

●BK1608

EHS（Environmental

Measuring

frequency

〔MHz〕

Impedance

〔Ω〕

DC resistance

〔Ω〕（max.）

Rated current

〔mA〕（max.）

Thickness

〔mm〕（inch）

Ordering code

Hazardous

Substances

RoHS

）

BK 1608 HW121

BK 1608 HW241

BK 1608 HW431

BK 1608 HW601

BK 1608 HS 220

BK 1608 HS 330

BK 1608 HS 470

BK 1608 HS 600

BK 1608 HS 800

BK 1608 HS 121

BK 1608 HS 241

BK 1608 HS 601

BK 1608 HS 102

BK 1608 HM121

BK 1608 HM241

BK 1608 HM471

BK 1608 HM601

BK 1608 HM102

BK 1608 LL 300

BK 1608 LL 470

BK 1608 LL 560

BK 1608 LL 680

BK 1608 LL 121

BK 1608 LL 181

BK 1608 LL 241

BK 1608 LL 331

BK 1608 LL 431

BK 1608 LL 511

BK 1608 LL 681

BK 1608 LM 751

BK 1608 LM 152

BK 1608 LM 182

BK 1608 LM 252

BK 1608 TS 431

BK 1608 TS 601

BK 1608 TS 102

120±25％

240±25％

430±25％

600±25％

22±25％

33±25％

47±25％

60±25％

80±25％

120±25％

240±25％

600±25％

1000±25％

120±25％

240±25％

470±25％

600±25％

1000±25％

30±25％

0.15

0.25

600

450

400

300

1500

1200

900

800

600

500

400

350

300

350

300

250

200

500

400

300

250

200

150

300

250

200

400

350

300

0.30

0.40

0.05

0.08

0.10

0.18

0.25

0.45

0.60

0.20

0.35

0.45

0.60

0.70

0.80±0.15

（0.031±0.006）

100

0.20

47±25％

56±25％

68±25％

0.30

0.35

120±25％

180±25％

240±25％

330±25％

430±25％

510±25％

680±25％

750±25％

1500±25％

1800±25％

2500±25％

430±25％

600±25％

1000±25％

0.50

0.65

0.80

0.85

0.90

1.00

0.60

0.75

0.85

1.10

0.21±30%

0.27±30%

0.30±30%

／

●BK2125

EHS（Environmental

Hazardous

Measuring

frequency

〔MHz〕

Impedance

〔Ω〕

DC resistance

〔Ω〕（max.）

Rated current

〔mA〕（max.）

Thickness

〔mm〕（inch）

Ordering code

Substances）

BK 2125 HS 150

BK 2125 HS 220

BK 2125 HS 330

BK 2125 HS 470

BK 2125 HS 750

BK 2125 HS 101

BK 2125 HS 121

BK 2125 HS 241

BK 2125 HS 431

BK 2125 HS 601

BK 2125 HS 102

BK 2125 HM121

BK 2125 HM241

BK 2125 HM471

BK 2125 HM601

BK 2125 HM102

BK 2125 LL 560

BK 2125 LL 121

BK 2125 LL 241

BK 2125 LM 751

BK 2125 LM 152

BK 2125 LM 182

BK 2125 LM 252

RoHS

15±25％

22±25％

33±25％

47±25％

75±25％

0.05

0.10

0.15

0.20

0.25

0.30

0.40

0.15

0.20

0.25

0.35

0.20

0.30

0.35

0.30

0.35

0.45

0.75

1200

1000

900

800

600

500

300

800

600

500

400

600

400

300

400

300

200

100±25％

120±25％

240±25％

430±25％

600±25％

1000±25％

120±25％

240±25％

470±25％

600±25％

1000±25％

56±25％

120±25％

240±25％

750±25％

1500±25％

1800±25％

2500±25％

0.85±0.2

（0.033±0.008）

100

1.25±0.2

（0.049±0.008）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

129

■ ELECTRICAL CHARACTERISTICS

BK0402

■

BK0402 HS100

100

BK0402 HS700

BK0402 HS121

BK0402 HM750

250

200

150

100

50

250

200

150

100

50

300

250

200

150

100

50

80

60

40

Ｚ

Ｒ

Ｚ

Ｒ

Ｚ

Ｒ

Ｚ

20

0

Ｒ

Ｘ

1000

Ｘ

1000

Ｘ

1000

0

1

10

100

10000

1

10

100

10000

1

10

100

10000

1

10

100

1000

10000

Frequency [MHz]

BK0603

■

BK0603 HS220

BK0402 HM121

BK0603 HS330

100

80

100

80

60

40

20

250

200

150

100

50

300

250

200

150

100

50

60

40

20

0

Ｚ

Ｒ

Z

R

Z

Ｚ

Ｒ

X

Ｘ

1000

Ｘ

0

10

100

1000

1

10

100

1

10

100

1000

10000

10

100

1000

Frequency [MHz]

Frequency［MHz］

Frequency [MHz]

BK0603 HS601

1000

800

600

400

200

250

200

150

100

50

250

200

150

100

50

R

Z

X

R

0

10

100

1000

10

100

1

10

100

1000

10

100

1000

Frequency［MHz］

BK0603 HM601

BK0603 HM241

BK0603 HM471

1000

800

600

400

200

0

500

400

1000

800

250

200

150

100

50

Z

300

200

100

0

600

400

200

0

Z

R

X

Ｘ

10

100

1

10

100

1000

1

10

100

1000

10000

Frequency［MHz］

BK0603 LL330

BK0603 LL100

BK0603 LL220

BK0603 LL470

500

400

300

200

100

0

500

400

250

200

150

100

50

250

200

150

100

50

300

200

100

0

Z

R

Z

Ｒ

Z

X

Ｘ

X

R

0

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

Frequency［MHz］

BK1005

■

BK0603 LL560

Z

BK1005 HW680

BK0603 LL800

BK0603 LL121

500

400

250

200

1000

800

1000

800

R

300

200

100

0

150

100

50

600

400

200

0

600

400

200

0

Z

Ｒ

R

Z

R

X

Ｘ

X

1000

0

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

10000

1

10

100

1000

10000

Frequency［MHz］

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

130

■ ELECTRICAL CHARACTERISTICS

BK1005 HW121

250

BK1005 HW241

BK1005 HW431

BK1005 HW601

500

400

1000

800

1000

800

200

150

300

200

100

0

600

400

200

0

600

400

200

0

Z

Ｚ

100

Z

Ｒ

Z

R

50

Ｘ

X

0

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

Frequency［MHz］

BK1005 HS800

BK1005 HS100

BK1005 HS330

BK1005 HS680

250

200

100

80

100

80

250

200

150

100

50

60

40

20

0

60

40

20

0

150

100

50

Z

R

Z

Ｒ

Z

R

X

0

1

0

10

100

1000

10000

10

100

1000

1

10

100

1000

10000

1

10

100

1000

10000

Frequency［MHz］

BK1005 HS431

250

200

150

100

50

1000

800

600

400

200

0

Z

R

X

100

0

10

1000

Frequency［MHz］

／

BK1005 HR601

BK1005 HM750

BK1005 HS102

BK1005 HM121

1000

200

150

2000

250

200

800

600

400

Z

150

100

50

100

R

1000

Z

50

0

200

0

R

X

0

1

10

100

1000

10000

1

10

100

1000

10000

Frequency［MHz］

BK1005 HM102

2000

500

400

300

200

1000

100

0

1

10

100

1000

10000

1

10

100

1000

10000

BK1005 LL220

BK1005 LL470

BK1005 LL100

BK1005 LL330

250

500

400

300

400

300

200

150

100

200

150

200

100

50

0

50

0

100

0

100

0

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

131

■ ELECTRICAL CHARACTERISTICS

BK1005 LL680

500

400

300

200

100

0

1

10

100

1000

10000

BK1608

■

BK1005 LM182

BKH1005 LM152

BKH1005 LM182

2500

2000

3000

2500

2000

1500

1000

500

3000

2500

2000

1500

1000

500

Z

1500

1000

R

Z

R

500

0

X

0

1

10

100

1000

10000

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

132

■ ELECTRICAL CHARACTERISTICS

BK1608 LL300

BK1608 LL470

BK1608 LL560

500

250

0

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

BK1608 LL680

BK1608 LL121

500

1500

250

750

0

1

10

100

1000

10000

1

10

100

1000

4000

2000

／

BK2125

■

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

133

■ ELECTRICAL CHARACTERISTICS

1000

Z

500

R

X

0

1

10

100

1000

500

Z

R

X

0

1

10

100

1000

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

134

／

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci07_e-01

135

■ PACKAGING

①Minimum Quantity

②Taping material

◦Tape & Reel Packaging

C K

C K S 2125

1608

2125

Standard Quantity［pcs］

Paper Tape Embossed Tape

Thickness

Type

［mm］（inch）

L K

H K

1005

1608

2125

0402

0603

1005

1608

0.8

CK1608（0603）

4000

ー

（0.031）

0.85

4000

ー

2000

ー

（0.033）

1.25

CK2125（0805）

CKS2125（0805）

（0.049）

0.85

H K Q 0603

A Q

B K

B K P 0603

B K P 1005

B K P 1608

B K P 2125

B K H 1005

105

4000

ー

0402

0603

1005

1608

2125

2010

（0.033）

1.25

2000

3000

2000

3000

2000

ー

（0.049）

0.9

CKP2012（0805）

CKP2016（0806）

ー

（0.035）

0.9

ー

（0.035）

0.7

ー

（0.028）

0.9

CKP2520（1008）

ー

C K

2125

（0.035）

1.1

C K S 2125

C K P 2012

C K P 2016

C K P 2520

N M

L K

H K

B K

ー

（0.043）

0.9

NM2012（0805）

NM2520（1008）

LK1005（0402）

LK1608（0603）

ー

2012

2520

2125

3216

（0.035）

1.1

ー

（0.043）

0.5

10000

4000

ー

（0.020）

0.8

ー

（0.031）

0.85

ー

（0.033）

1.25

LK2125（0805）

2000

ー

（0.049）

0.2

③Taping Dimensions

HK0402（01005）

HK0603（0201）

HK1005（0402）

HK1608（0603）

20000

15000

10000

4000

ー

（0.008）

0.3

◦Paper tape (0.315 inches wide)

ー

（0.012）

0.5

ー

（0.020）

0.8

ー

（0.031）

0.85

4000

3000

ー

（0.033）

1.0

HK2125（0805）

ー

（0.039）

0.3

HKQ0603S（0201）

HKQ0603U（0201）

AQ105（0402）

15000

10000

20000

15000

10000

4000

ー

Unit : mm（inch）

（0.012）

0.3

ー

（0.012）

0.5

Insertion

Tape

Thickness

ー

Thickness

Chip cavity

（0.020）

0.2

Pitch

Type

〔mm〕

（inch）

A

B

F

T

BK0402（01005）

BK0603（0201）

BK1005（0402）

BKH1005（0402）

BK1608（0603）

ー

（0.008）

0.3

0.8

1.0±0.2

1.8±0.2

4.0±0.1

1.1ｍａｘ

CK1608（0603）

CK2125（0805）

CKS2125（0805）

LK1005（0402）

LK1608（0603）

LK2125（0805）

HK0402（01005）

HK0603（0201）

HK1005（0402）

HK1608（0603）

HKQ0603S（0201）

HKQ0603U（0201）

AQ105（0402）

（0.031）（0.039±0.008）（0.071±0.008）（0.157±0.004）（0.043max）

ー

（0.012）

0.5

0.85

（0.033）（0.059±0.008）（0.091±0.008）（0.157±0.004）（0.043max）

0.85 1.5±0.2 2.3±0.2 4.0±0.1 1.1ｍａｘ

（0.033）（0.059±0.008）（0.091±0.008）（0.157±0.004）（0.043max）

0.5 0.65±0.1 1.15±0.1 2.0±0.05 0.8ｍａｘ

（0.020）（0.026±0.004）（0.045±0.004）（0.079±0.002）（0.031max）

0.8 1.0±0.2 1.8±0.2 4.0±0.1 1.1ｍａｘ

（0.031）（0.039±0.008）（0.071±0.008）（0.157±0.004）（0.043max）

0.85 1.5±0.2 2.3±0.2 4.0±0.1 1.1ｍａｘ

（0.033）（0.059±0.008）（0.091±0.008）（0.157±0.004）（0.043max）

0.2 0.25±0.04 0.45±0.04 2.0±0.05 0.36ｍａｘ

（0.008）（0.010±0.002）（0.018±0.002）（0.079±0.002）（0.014max）

0.3 0.40±0.06 0.70±0.06 2.0±0.05 0.45ｍａｘ

（0.012）（0.016±0.002）（0.028±0.002）（0.079±0.002）（0.018max）

0.5 0.65±0.1 1.15±0.1 2.0±0.05 0.8ｍａｘ

（0.020）（0.026±0.004）（0.045±0.004）（0.079±0.002）（0.031max）

0.8 1.0±0.2 1.8±0.2 4.0±0.1 1.1ｍａｘ

（0.031）（0.039±0.008）（0.071±0.008）（0.157±0.004）（0.043max）

0.3 0.40±0.06 0.70±0.06 2.0±0.05 0.45ｍａｘ

（0.012）（0.016±0.002）（0.028±0.002）（0.079±0.002）（0.018max）

0.3 0.40±0.06 0.70±0.06 2.0±0.05 0.45ｍａｘ

（0.012）（0.016±0.002）（0.028±0.002）（0.079±0.002）（0.018max）

0.5

1.5±0.2

2.3±0.2

4.0±0.1

1.1ｍａｘ

ー

（0.020）

0.5

ー

（0.020）

0.8

ー

（0.031）

0.85

ー

（0.033）

1.25

BK2125（0805）

2000

ー

（0.049）

0.45

BK2010（0804）

BK3216（1206）

BKP0603（0201）

BKP1005（0402）

BKP1608（0603）

BKP2125（0805）

4000

ー

（0.018）

0.8

4000

ー

（0.031）

0.3

15000

10000

4000

（0.012）

0.5

ー

（0.020）

0.8

ー

0.75±0.1

1.15±0.1

2.0±0.05

0.8ｍａｘ

（0.031）

0.85

（0.020）（0.030±0.004）（0.045±0.004）（0.079±0.002）（0.031max）

ー

（0.033）

To next page

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP1

■ PACKAGING

⑤Reel Size

Insertion

Pitch

Tape

Thickness

Chip cavity

Type

〔mm〕

（inch）

A

B

F

T

2.0±0.5

0.2

0.25±0.04

0.45±0.04

2.0±0.05

0.36ｍａｘ

（0.079±0.031）

BK0402（01005）

BK0603（0201）

BK1005（0402）

BK1608（0603）

BK2125（0805）

BK2010（0804）

BKP0603（0201）

BKP1005（0402）

BKP160（8 0603）

BKP2125（0805）

BKH100（5 0805）

（0.008）（0.010±0.002）（0.018±0.002）（0.079±0.002）（0.014max）

φ13.0±0.2

0.3

（0.012）（0.016±0.002）（0.028±0.002）（0.079±0.002）（0.018max）

0.5 0.65±0.1 1.15±0.1 2.0±0.05 0.8ｍａｘ

（0.020）（0.026±0.004）（0.045±0.004）（0.079±0.002）（0.031max）

0.8 1.0±0.2 1.8±0.2 4.0±0.1 1.1ｍａｘ

（0.031）（0.039±0.008）（0.071±0.008）（0.157±0.004）（0.043max）

0.85 1.5±0.2 2.3±0.2 4.0±0.1 1.1ｍａｘ

（0.033）（0.059±0.008）（0.091±0.008）（0.157±0.004）（0.043max）

0.45 1.2±0.1 2.17±0.1 4.0±0.1 0.8ｍａｘ

（0.018）（0.047±0.004）（0.085±0.004）（0.157±0.004）（0.031max）

0.3 0.40±0.06 0.70±0.06 2.0±0.05 0.45ｍａｘ

（0.012）（0.016±0.002）（0.028±0.002）（0.079±0.002）（0.018max）

0.5 0.65±0.1 1.15±0.1 2.0±0.05 0.8ｍａｘ

（0.020）（0.026±0.004）（0.045±0.004）（0.079±0.002）（0.031max）

0.8 1.0±0.2 1.8±0.2 4.0±0.1 1.1ｍａｘ

（0.031）（0.039±0.008）（0.071±0.008）（0.157±0.004）（0.043max）

0.85 1.5±0.2 2.3±0.2 4.0±0.1 1.1ｍａｘ

（0.033）（0.059±0.008）（0.091±0.008）（0.157±0.004）（0.043max）

0.5

0.40±0.06

0.70±0.06

2.0±0.05

0.45ｍａｘ

（φ0.512±0.020）

⑥Top tape strength

The top tape requires a peel-off force of 0.1～0.7N in the direction of the arrow as

0.65±0.1

1.15±0.1

2.0±0.05

0.8ｍａｘ

illustrated below.

（0.020）（0.026±0.004）（0.045±0.004）（0.079±0.002）（0.031max）

Unit : mm（inch）

◦Embossed Tape (0.315 inches wide)

Unit : mm（inch）

Insertion

Pitch

Tape

Thickness

〔mm〕

（inch）

Chip cavity

Type

A

B

F

K

T

1.25

1.5±0.2

2.3±0.2

4.0±0.1

2.0

0.3

CK2125（0805）

CKS2125（0805）

CKP2012（0805）

CKP2016（0806）

（0.049）（0.059±0.008）（0.091±0.008）（0.157±0.004）（0.079）（0.012）

1.25

（0.049）（0.059±0.008）（0.091±0.008）（0.157±0.004）（0.079）（0.012）

0.9 1.55±0.2 2.3±0.2 4.0±0.1 1.3 0.3

（0.035）（0.061±0.008）（0.091±0.008）（0.157±0.004）（0.051）（0.012）

0.9 1.8±0.1 2.2±0.1 4.0±0.1 1.3 0.25

（0.035）（0.071±0.004）（0.087±0.004）（0.157±0.004）（0.051）（0.01）

1.5±0.2

2.3±0.2

4.0±0.1

2.0

0.3

0.7

1.4

（0.028）

（0.055）

0.9

2.3±0.1

2.8±0.1

4.0±0.1

1.4

0.3

CKP2520（1008）

（0.035）（0.091±0.004）（0.110±0.004）（0.157±0.004）（0.055）（0.012）

1.1

1.7

（0.043）

（0.067）

0.9

1.55±0.2

2.3±0.2

4.0±0.1

1.3

0.3

NM2012（0805）

NM2520（1008）

LK2125（0805）

（0.035）（0.061±0.008）（0.091±0.008）（0.157±0.004）（0.051）（0.012）

1.1 2.3±0.1 2.8±0.1 4.0±0.1 1.7 0.3

（0.043）（0.091±0.004）（0.110±0.004）（0.157±0.004）（0.067）（0.012）

1.25 1.5±0.2 2.3±0.2 4.0±0.1 2.0 0.3

（0.049）（0.059±0.008）（0.091±0.008）（0.157±0.004）（0.079）（0.012）

0.85

1.5

（0.033）

1.0

（0.059）

2.0

1.5±0.2

2.3±0.2

4.0±0.1

0.3

（0.012）

HK2125（0805）

（0.059±0.008）（0.091±0.008）（0.157±0.004）

（0.039）

（0.079）

1.25

1.5±0.2

2.3±0.2

4.0±0.1

2.0

0.3

BK2125（0805）

BK3216（1206）

（0.049）（0.059±0.008）（0.091±0.008）（0.157±0.004）（0.079）（0.012）

0.8 1.9±0.1 3.5±0.1 4.0±0.1 1.4 0.3

（0.031）（0.075±0.004）（0.138±0.004）（0.157±0.004）（0.055）（0.012）

④LEADER AND BLANK PORTION

160mm or more

100mm or more

（

6.3inches or more

）

（3.94inches or more）

400mm ore more

Direction of tape feed

（15.7inches or more）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP2

■ RELIABILITY DATA

Multilayer chip inductors and beads

1. Operating Temperature Range

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

－55～＋125℃

－55～＋85℃

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

－40～＋85℃

LK1608

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

－55～＋125℃

－40～＋85℃

－55～＋125℃

2. Storage Temperature Range

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

－55～＋125℃

－55～＋85℃

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

－40～＋85℃

LK1608

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

－55～＋125℃

－40～＋85℃

－55～＋125℃

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP3

■ RELIABILITY DATA

Multilayer chip inductors and beads

3. Rated Current

BK0402

240～540mA DC

100～500mA ＤＣ

120～1000mA ＤＣ

200mA ＤＣ

150～1500mA ＤＣ

200～1200mA ＤＣ

100mA ＤＣ

BK0603

BK1005

BKH1005

BK1608

BK2125

BK2010

ARRAY

BK3216

100～200mA ＤＣ

1.0A ＤＣ

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

800～2000mA DC

1.0～3.0A ＤＣ

1.5～4.0A ＤＣ

50～60mA DC

60～500mA DC

110～280mA DC

0.7～1.2A DC

0.9～1.6A DC

1.1～1.8A DC

0.8～1.5A DC

0.9～1.1A DC

20～25mA DC

1～150mA DC

5～300mA DC

160～380mA DC

60～470mA DC

110～300mA DC

150～300mA DC

300mA DC

LK1608

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

130～600mA DC

280～710mA DC

Deﬁnition of rated current：

・In the CK, CKS and BK Series, the rated current is the value of current at which the temperature of the element is increased within 20℃.

・In the BK Series P type and CK Series P type, NM Series the rated current is the value of current at which the temperature of the element is increased within 40℃.

・In the LK,HK,HKQ,and AQ Series, the rated current is either the DC value at which the internal L value is decreased within 5% with the application of DC bias, or the value of current

at which the temperature of the element is increased within 20℃.

4. Impedance

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

10～120Ω ±25%

10～600Ω ±25%

10～1800Ω ±25%

1500～1800Ω ±25%

22～2500Ω ±25%

15～2500Ω ±25%

5～1000Ω ±25%

68～1000Ω ±25%

22～33Ω ±25%

BK2010

BK3216

ARRAY

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

10～220Ω ±25%

33～470Ω ±25%

33～330Ω ±25%

LK1608

——

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

【Test Methods and Remarks】

BK0402 Series

Measuring frequency：100±1MHz

Measuring equipment：E4991A（or its equivalent）

Measuring jig：16196D（or its equivalent）

BK0603 Series, BKP0603 Series

BK1608・2125 Series, BKP1608・2125 Series

Measuring frequency：100±1MHz

Measuring equipment：4291A（or its equivalent）, 4195A（or its equivalent）

Measuring jig：16092A（or its equivalent）or 16192A（or its equivalent）/HW

BK2010・3216 Series

Measuring frequency：100±1MHz

Measuring equipment：4291A（or its equivalent）, 4195A（or its equivalent）

Measuring jig：16192A（or its equivalent）

Measuring frequency：100±1MHz

Measuring equipment：4291A（or its equivalent）

Measuring jig：16193A（or its equivalent）

BK1005 Series, BKP1005 Series, BKH1005 Series

Measuring frequency：100±1MHz

Measuring equipment：4291A（or its equivalent）

Measuring jig：16192A（or its equivalent）, 16193A（or its equivalent）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP4

■ RELIABILITY DATA

Multilayer chip inductors and beads

5. Inductance

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

——

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

4.7～10.0μH：±20%

0.1～10.0μH：±20%

1.0～10.0μH：±20%

0.47～4.7μH：±20%

0.82～1.0μH：±20%

1.0～2.2μH：±20%

0.12～2.2μH：±10%ꢀ Q 0.12～2.2μH：±30%

LK1608

0.047～33.0μH：±20%ꢀ 0.10～12.0μH：±10%ꢀ Q 0.12～2.2μH：±30%

1.0～6.2nH：±0.3nHꢀ 6.8～12nH：±5%

1.0～6.2nH：±0.3nHꢀ 6.8～100nH：±5%

1.0～6.2nH：±0.3nHꢀ 6.8～270nH：±5%

1.0～5.6nH：±0.3nHꢀ 6.8～470nH：±5%

1.5～5.6nH：±0.3nHꢀ 6.8～470nH：±5%

0.6～6.2nH：±0.3nHꢀ 6.8～22nH：±5%

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

1.0～6.2nH：±0.3nHꢀ 6.8～15nH：±5%

【Test Methods and Remarks】

CK Series：

Measuring frequency：2 to 4MHz（CK1608）

Measuring frequency：2 to 25MHz（CK2125）

Measuring frequency：2 to 10MHz（CKS2125）

LK Series：

Measuring frequency：10 to 25MHz（LK1005）

Measuring frequency：1 to 50MHz（LK1608）

Measuring frequency：0.4 to 50MHz（LK2125）

CKP Series, NM Series：

Measuring frequency：1MH（z CKP2012, CKP2016, CKP2520, NM2012・NM2520）

Measuring equipment, jig：・4194A＋16085B＋16092A（or its equivalent）

・4195A＋41951＋16092A（or its equivalent）

・4294A＋16192A（or its equivalent）

・4291A＋16193A（or its equivalent）/LK1005

・4285A＋42841A＋42842C＋42851－61100（CKP2012・CKP2016・CKP2520・NM2012・NM2520）

Measuring current：・1mA rm（s 0.047 to 4.7μH ꢀ ・0.1mA rm（s 5.6 to 33μH）

HK、HKQ、AQ Series：

Measuring frequency：100MH（z HK0402・HK0603・HK1005・AQ105）

Measuring frequency：50/100MH（z HK1608・HK2125）

Measuring frequency：500MH（z HKQ0603S・HKQ0603U）

Measuring equipment, jig：・4291A＋16197A（or its equivalent）/HK0603・AQ105

・4291A＋16193A（or its equivalent）/HK1005

・E4991A＋16197A（or its equivalent）/HKQ0603S・HKQ0603U

・4291A＋16092＋in-house made jig（or its equivalent）/HK1608・HK2125

・E4991A＋16196D（or its equivalent）/HK0402

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP5

■ RELIABILITY DATA

Multilayer chip inductors and beads

6. Q

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

——

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

20 min.

15～20 min.

——

10～20 min.

10～35 min.

15～50 min.

3 min.

LK1608

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

4～5 min.

8 min.

8～12 min.

10～18 min.

10～13 min.

8 min.

【Test Methods and Remarks】

HK、HKQ、AQ Series：

CK Series：

Measuring frequency：100MH（z HK0603・HK1005・AQ105）

Measuring frequency：50/100MH（z HK1608・HK2125）

Measuring frequency：2 to 4MH（z CK1608）

Measuring frequency：2 to 25MH（z CK2125）

LK Series：

Measuring frequency：10 to 25MH（z LK1005）

Measuring frequency：1 to 50MH（z LK1608）

Measuring frequency：0.4 to 50MH（z LK2125）

Measuring frequency：500MH（z HKQ0603S・HKQ0603U）

Measuring equipment, jig：・4291A＋16197A（or its equivalent）/HK0603・AQ105

・4291A＋16193A（or its equivalent）/HK1005

・E4991A＋16197A（or its equivalent）/HKQ0603S

HKQ0603U

・4291A＋16092A＋ in-house made jig（or its

equivalent）/HK1608・HK2125

・E4991A＋16196D（or its equivalent）HK0402

・

Measuring equipment, jig：・4194A＋16085B＋16092A（or its equivalent）

・4195A＋41951＋16092A（or its equivalent）

・4294A＋16192A（or its equivalent）

・4291A＋16193A（or its equivalent）/LK1005

Measuring current：・1mA rm（s 0.047 to 4.7μH ꢀ ・0.1mA rm（s 5.6 to 33μH）

7. DC Resistance

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

0.10～0.53Ω max.

0.065～1.50Ω max.

0.03～0.80Ω max.

1.50～2.00Ω max.

0.05～1.10Ω max.

0.05～0.75Ω max.

0.10～0.90Ω max.

0.15～0.80Ω max.

0.065～0.070Ω max.

0.030～0.20Ω max.

0.025～0.18Ω max.

0.020～0.075Ω max.

0.45～0.85Ω（±30%）

0.16～0.65Ω max.

0.09～0.40Ω typ.

0.12～0.52Ω max.

0.10～0.28Ω max.

0.08～0.20Ω max.

0.05～0.16Ω max.

0.10～0.19Ω max.

0.13～0.22Ω max.

0.41～1.16Ω max.

0.2～2.2Ω max.

BK2010

BK3216

ARRAY

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

LK1608

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

0.1～1.1Ω max.

0.18～0.99Ω max.

0.11～3.74Ω max.

0.08～4.8Ω max.

0.05～2.6Ω max.

0.10～1.5Ω max.

0.06～1.29Ω max.

0.07～0.45Ω max.

HKQ0603S

HKQ0603U

AQ105

【Test Methods and Remarks】

Measuring equipment：VOAC-7412（made by Iwasaki Tsushinki ꢀ VOAC-7512（made by Iwasaki Tsushinki）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP6

■ RELIABILITY DATA

Multilayer chip inductors and beads

8. Self Resonance Frequenc（y SRF）

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

——

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

17～25MHz min.

24～235MHz min.

——

40～180MHz min.

LK1608

9～260MHz min.

LK2125

13～320MHz min.

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

29000～10000MHz min.

900～10000MHz min.

400～10000MHz min.

300～10000MHz min.

200～4000MHz min.

1900～10000MHｚ min.

2300～10000MHz min.

【Test Methods and Remarks】

LK Series：

Measuring equipment：4195A（or its equivalent）

Measuring jig：41951＋16092A（or its equivalent）

HK、HKQ、AQ Series：

Measuring equipment：8719C（or its equivalent）・8753D（or its equivalent）/HK2125

9. Temperature Characteristic

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

——

LK1608

LK2125

HK0402

HK0603

HK1005

HK1608

Inductance change：Within ±10％

HK2125

HKQ0603S

HKQ0603U

AQ105

【Test Methods and Remarks】

HK、HKQ、AQ Series：Temperature range：－30 to ＋85℃

Reference temperature：＋20℃

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP7

■ RELIABILITY DATA

Multilayer chip inductors and beads

10. Resistance to Flexure of Substrate

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

No mechanical damage.

NM2520

LK1005

LK1608

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

【Test Methods and Remarks】

Warp：2mm（BK Series without 0402size, BKP, BKH, CK, CKS, CKP, NM, LK, HK, HKQ, AQ Series）

：1mm（BK0402, HK0402 Series）

Testing board：glass epoxy-resin substrate

Thickness：0.8mm

11. Solderability

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

At least 75％ of terminal electrode is covered by new solder.

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

LK1608

At least 75％ of terminal electrode is covered by new solder.

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

【Test Methods and Remarks】

Solder temperature：230±5℃

Duration：4±1 sec.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP8

■ RELIABILITY DATA

Multilayer chip inductors and beads

12. Resistance to Soldering

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

Appearance：No signiﬁcant abnormality.

Impedance change：Within ±30％

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

No mechanical damage.

Remaining terminal electrode：70％ min.

Inductance change

R10～4R7 ：Within ±10％

6R8～100 ：Within ±15％

CKS2125 ：Within ±20％

CKP2012、CKP2016、CKP2520、NM2012、NM2520：Within ±30％

No mechanical damage.ꢀ Remaining terminal electrode：70％ min.ꢀ Inductance change：Within ±15％

LK1608

No mechanical damage.

Remaining terminal electrode：70％ min.ꢀ Inductance changeꢀ 47N～4R7：Within ±10％ꢀ 5R6～330：Within ±15％

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

No mechanical damage.

Remaining terminal electrode：70％ min.ꢀ Inductance change：Within ±5％

【Test Methods and Remarks】

Solder temperature：260±5℃

Duration：10±0.5 sec.

Preheating temperature：150 to 180℃

Preheating time：3 min.

Flux：Immersion into methanol solution with colophony for 3 to 5 sec.

Recovery：2 to 3 hrs of recovery under the standard condition after the test（. See Note 1）

13. Thermal Shock

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

Appearance：No signiﬁcant abnormality.

Impedance change：Within ±30％

BK2010

BK3216

ARRAY

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

No mechanical damage.

Inductance change：Within ±20％ꢀ Q change：Within ±30％

Inductance change：Within ±20％（CKS2125）

No mechanical damage.ꢀ Inductance change：Within ±30％

No mechanical damage.

Inductance change：Within ±10％ꢀ Q change：Within ±30％

LK1608

LK2125

HK0402

HK0603

HK1005

HK1608

HK2125

No mechanical damage.

Inductance change：Within ±10％ꢀ Q change：Within ±20％

HKQ0603S

HKQ0603U

AQ105

【Test Methods and Remarks】

Conditions for 1 cycle

Step 1：Minimum operating temperature

＋0

－3

℃ 30±3 min.

Step 2：Room temperature 2 to 3 min.

＋3

－0

Step 3：Maximum operating temperature

Step 4：Room temperature 2 to 3 min.

Number of cycles：5

℃ 30±3 min.

Recovery：2 to 3 hrs of recovery under the standard condition after the test（. See Note 1）

(Note 1) When there are questions concerning mesurement result；measurement shall be made after 48±2 hrs of recovery under the standard condition.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP9

■ RELIABILITY DATA

Multilayer chip inductors and beads

14. Damp Heat（Steady state）

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

Appearance：No signiﬁcant abnormality.

Impedance change：Within ±30％

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

No mechanical damage.

Inductance change：Within ±20％ꢀ Q change：Within ±30％

Inductance change：Within ±20％

No mechanical damage.ꢀ Inductance change：Within ±30％

No mechanical damage.

Inductance change：Within ±10％ꢀ Q change：Within ±30％

LK1608

LK2125

No mechanical damage.ꢀ Inductance change：Within ±20％ꢀ Q change：Within ±30％

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

No mechanical damage.

Inductance change：Within ±10％ꢀ Q change：Within ±20％

【Test Methods and Remarks】

BK, BKP, BKH Series：

Temperature：40±2℃

Humidity：90 to 95％RH

＋24

Duration：500

hrs

－0

Recovery：2 to 3 hrs of recovery under the standard condition after the removal from test chamber（. See Note 1）

LK、CK、CKS、CKP、NM、HK、HKQ、AQ Series：

Temperature：40±2℃（LK、CK、CKS、CKP、NM Series）

：60±2℃（HK、HKQ、AQ Series）

Humidity：90 to 95％RH

Duration：500±12 hrs

Recovery：2 to 3 hrs of recovery under the standard condition after the removal from test chamber（. See Note 1）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP10

■ RELIABILITY DATA

Multilayer chip inductors and beads

15. Loading under Damp Heat

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

Appearance：No signiﬁcant abnormality.

Impedance change：Within ±30％

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

No mechanical damage.

Inductance change：Within ±20％ꢀ Q change：Within ±30％

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

No mechanical damage.ꢀ Inductance change：Within ±20％

No mechanical damage.ꢀ Inductance change：Within ±30％

No mechanical damage.ꢀ Inductance change：Within ±10％ꢀ Q change：Within ±30％

No mechanical damage.

LK1608

Inductance change：0.047 to 12.0μH：Within ±10％ꢀ 15.0 to 33.0μH：Within ±15％ꢀ Q change：Within ±30％

LK2125

No mechanical damage.ꢀ Inductance change：Within ±20％ꢀ Q change：Within ±30％

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

No mechanical damage.

Inductance change：Within ±10％ꢀ Q change：Within ±20％

【Test Methods and Remarks】

BK, BKP, BKH Series：

Temperature：40±2℃

Humidity：90 to 95％RH

Applied current：Rated current

＋24

Duration：500

hrs

－0

Recovery：2 to 3 hrs of recovery under the standard condition after the removal from test chamber（. See Note 1）

LK、CK、CKS、CKP、NM、HK、HKQ、AQ Series：

Temperature：40±2℃（LK、CK、CKS、CKP、NM Series）

：60±2℃（HK、HKQ、AQ Series）

Humidity：90 to 95％RH

Applied current：Rated current

Duration：500±12 hrs

Recovery：2 to 3 hrs of recovery under the standard condition after the removal from test chamber（. See Note 1）

Note on standard condition: "standard condition" referred to herein is deﬁned as follows:

5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.

When there are questions concerning measurement results:

In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air pressure.

Unless otherwise speciﬁed, all the tests are conducted under the "standard condition."

(Note 1) Measurement shall be made after 48±2 hrs of recovery under the standard condition.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP11

■ RELIABILITY DATA

Multilayer chip inductors and beads

16. Loading at High Temperature

BK0402

BK0603

BK1005

BKH1005

BK1608

BK2125

Appearance：No signiﬁcant abnormality

Impedance change：Within ±30％

BK2010

ARRAY

BK3216

BKP0603

BKP1005

BKP1608

BKP2125

CK1608

No mechanical damage.

Inductance change：Within ±20％ꢀ Q change：Within ±30％

CK2125

CKS2125

CKP2012

CKP2016

CKP2520

NM2012

NM2520

LK1005

No mechanical damage.ꢀ Inductance change：Within ±20％

No mechanical damage.ꢀ Inductance change：Within ±30％

No mechanical damage.ꢀ Inductance change：Within ±10％ꢀ Q change：Within ±30％

No mechanical damage.

LK1608

Inductance change：0.047 to 12.0μH：Within ±10％ꢀ 15.0 to 33.0μH：Within ±15％ꢀ Q change：Within ±30％

LK2125

No mechanical damage.ꢀ Inductance change：Within ±20％ꢀ Q change：Within ±30％

HK0402

HK0603

HK1005

HK1608

HK2125

HKQ0603S

HKQ0603U

AQ105

No mechanical damage.

Inductance change：Within ±10％ꢀ Q change：Within ±20％

【Test Methods and Remarks】

BK, BKH Series：

Temperature：125±3℃

Applied current：Rated current

＋24

Duration：500

hrs

－0

Recovery：2 to 3 hrs of recovery under the standard condition after the removal from test chamber（. See Note 1）

LK、CK、CKS、CKP、NM、HK、HKQ、AQ、BKP Series：

Temperature：85±2℃（LK、CK、CKS、CKP、NM、BKP Series）

：85±2℃（HK1608，2125）

：85±2℃（HK1005, AQ105 operating temperature range －55 to ＋85℃）

：125±2℃（HK0402, HK0603, HK1005, HKQ0603S, HKQ0603U, AQ105 operating temperature range －55 to ＋125℃）

Applied current：Rated current

Duration：500±12 hrs

Recovery：2 to 3 hrs of recovery under the standard condition after the test（. See Note 1）

Note on standard condition: "standard condition" referred to herein is deﬁned as follows:

5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.

When there are questions concerning measurement results:

In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air pressure. Unless other-

wise speciﬁed, all the tests are conducted under the "standard condition."

(Note 1) Measurement shall be made after 48±2 hrs of recovery under the standard condition.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP12

■ PRECAUTIONS

Precautions on the use of Multilayer chip Inductors, Multilayer chip inductors for high frequency, Multilayer chip bead Inductors

1. Circuit Design

◆Veriﬁcation of operating environment, electrical rating and performance

1. A malfunction in medical equipment, spacecraft, nuclear reactors, etc. may cause serious harm to human life or have severe social ramiﬁcations.

As such, any inductors to be used in such equipment may require higher safety and/or reliability considerations and should be clearly differentiated from

Precautions

components used in general purpose applications.

◆Operating Current（Veriﬁcation of Rated current）

1. The operating current for inductors must always be lower than their rated values.

2. Do not apply current in excess of the rated value because the inductance may be reduced due to the magnetic saturation effect.

2. PCB Design

◆Pattern conﬁguration（s Design of Land-patterns）

1. When inductors are mounted on a PCB, the size of land patterns and the amount of solder used（size of ﬁllet）can directly affect inductor performance.

Therefore, the following items must be carefully considered in the design of solder land patterns:

（1）The amount of solder applied can affect the ability of chips to withstand mechanical stresses which may lead to breaking or cracking. Therefore, when

designing land-patterns it is necessary to consider the appropriate size and conﬁguration of the solder pads which in turn determines the amount of

solder necessary to form the ﬁllets.

（2）When more than one part is jointly soldered onto the same land or pad, the pad must be designed so that each component's soldering point is separated

Precautions

by solder-resist.

（3）The larger size of land patterns and amount of solder, the smaller Q value after mounting on PCB. It makes higher the Q value to design land patterns

smaller than terminal electrode of chips.

◆Pattern conﬁguration（s Inductor layout on panelized［breakaway］PC boards）

1. After inductors have been mounted on the boards, chips can be subjected to mechanical stresses in subsequent manufacturing processes（PCB cutting,

board inspection, mounting of additional parts, assembly into the chassis, wave soldering the reﬂow soldered boards etc.）For this reason, planning pattern

conﬁgurations and the position of SMD inductors should be carefully performed to minimize stress.

◆Pattern conﬁguration（s Design of Land-patterns）

1. The following diagrams and tables show some examples of recommended patterns to prevent excessive solder amount（s larger ﬁllets which extend above

the component end terminations）. Examples of improper pattern designs are also shown.

（1）Recommended land dimensions for a typical chip inductor land patterns for PCBs

Recommended land dimensions for wave-soldering

Recommended land dimensions for reﬂow-soldering

Type

L

1608

1.6

2125

2.0

3216

3.2

Type

L

0402

0.4

0603

0.6

1005

1.0

105

1.0

0.6

1608

1.6

2012

2.0

2125

2.0

2016

2.0

3216

3.2

2520

2.5

W

A

0.8

1.25

1.6

W

A

0.2

0.3

0.5

0.8

1.25

1.6

2.0

0.8～1.0 1.0～1.4 1.8～2.5

0.5～0.8 0.8～1.5 0.8～1.7

0.6～0.8 0.9～1.2 1.2～1.6

（Unit：mm）

0.15～0.25 0.20～0.30 0.45～0.55 0.50～0.55 0.8～1.0 0.8～1.2 0.8～1.2 0.8～1.2 1.8～2.5 1.0～1.4

0.10～0.20 0.20～0.30 0.40～0.50 0.30～0.40 0.6～0.8 0.8～1.2 0.8～1.2 0.8～1.2 0.6～1.5 0.6～1.0

0.15～0.30 0.25～0.40 0.45～0.55 0.60～0.70 0.6～0.8 0.9～1.6 0.9～1.6 1.2～2.0 1.2～2.0 1.8～2.2

（Unit：mm）

B

C

Excess solder can affect the ability of chips to withstand mechanical stresses. Therefore, please take proper precautions when designing land-patterns.

Recommended land dimension for Reﬂow-soldering

Type

L

3216

3.2

2010

2.0

W

a

1.6

1.0

0.7～0.9 0.5～0.6

0.8～1.0 0.5～0.6

0.4～0.5 0.2～0.3

Technical

consider-

ations

b

c

d

0.8

0.5

（Unit：mm）

（2）Examples of good and bad solder application

Item

Not recommended

Recommended

Mixed mounting of SMD

and leaded components

Component placement

close to the chassis

Hand-soldering of leaded

components near mounted

components

Horizontal component

placement

To next page

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP13

■ PRECAUTIONS

Precautions on the use of Multilayer chip Inductors, Multilayer chip inductors for high frequency, Multilayer chip bead Inductors

2. PCB Design

◆Pattern conﬁguration（s Inductor layout on panelized［breakaway］PC boards）

1-1. The following are examples of good and bad inductor layout; SMD inductors should be located to minimize any possible mechanical stresses from board

warp or deﬂection.

Item

Not recommended

Recommended

Deﬂection of the board

1-2. To layout the inductors for the breakaway PC board, it should be noted that the amount of mechanical stresses given will vary depending on inductor layout.

An example below should be counted for better design.

Technical

consider-

ations

1-3. When breaking PC boards along their perforations, the amount of mechanical stress on the inductors can vary according to the method used. The following

methods are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, any ideal SMD inductor layout must

also consider the PCB splitting procedure.

3. Considerations for automatic placement

◆Adjustment of mounting machine

1. Excessive impact load should not be imposed on the inductors when mounting onto the PC boards.

2. The maintenance and inspection of the mounter should be conducted periodically.

Precautions ◆Selection of Adhesives

1. Mounting inductors with adhesives in preliminary assembly, before the soldering stage, may lead to degraded inductor characteristics unless the following

factors are appropriately checked; the size of land patterns, type of adhesive, amount applied, hardening temperature and hardening period. Therefore, it is

imperative to consult the manufacturer of the adhesives on proper usage and amounts of adhesive to use.

◆Adjustment of mounting machine

1. If the lower limit of the pick-up nozzle is low, too much force may be imposed on the inductors, causing damage. To avoid this, the following points should be

considered before lowering the pick-up nozzle:

（1）The lower limit of the pick-up nozzle should be adjusted to the surface level of the PC board after correcting for deﬂection of the board.

（2）The pick-up pressure should be adjusted between 1 and 3N static loads.

（3）To reduce the amount of deﬂection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins should be used under the PC

board. The following diagrams show some typical examples of good pick-up nozzle placement:

Item

Improper method

Proper method

Single-sided mounting

Double-sided mounting

2. As the alignment pin wears out, adjustment of the nozzle height can cause chipping or cracking of the inductors because of mechanical impact on the

inductors. To avoid this, the monitoring of the width between the alignment pin in the stopped position, and maintenance, inspection and replacement of the

pin should be conducted periodically.

Technical

consider-

ations

◆Selection of Adhesives

1. Some adhesives may cause reduced insulation resistance. The difference between the shrinkage percentage of the adhesive and that of the inductors may

result in stresses on the inductors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect component

placement, so the following precautions should be noted in the application of adhesives.

（1）Required adhesive characteristics

a. The adhesive should be strong enough to hold parts on the board during the mounting & solder process.

b. The adhesive should have sufﬁcient strength at high temperatures.

c. The adhesive should have good coating and thickness consistency.

d. The adhesive should be used during its prescribed shelf life.

e. The adhesive should harden rapidly.

f. The adhesive must not be contaminated.

g. The adhesive should have excellent insulation characteristics.

h. The adhesive should not be toxic and have no emission of toxic gasses.

（2）When using adhesives to mount inductors on a PCB, inappropriate amounts of adhesive on the board may adversely affect component placement. Too

little adhesive may cause the inductors to fall off the board during the solder process. Too much adhesive may cause defective soldering due excessive

ﬂow of adhesive on to the land or solder pad.

［Recommended conditions］

Figure

0805 case sizes as examples

0.3mm min

a

b

c

100～120μm

Area with no adhesive

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP14

■ PRECAUTIONS

Precautions on the use of Multilayer chip Inductors, Multilayer chip inductors for high frequency, Multilayer chip bead Inductors

4. Soldering

◆Selection of Flux

1. Since ﬂux may have a signiﬁcant effect on the performance of inductors, it is necessary to verify the following conditions prior to use;

（1）Flux used should be with less than or equal to 0.1 wt%（Chlorine conversion method）of halogenated content. Flux having a strong acidity content should

not be applied.

Precautions

（2）When soldering inductors on the board, the amount of ﬂux applied should be controlled at the optimum level.

（3）When using water-soluble ﬂux, special care should be taken to properly clean the boards.

◆Soldering

1. Temperature, time, amount of solder, etc. are speciﬁed in accordance with the following recommended conditions, and please contact us about peak tem-

perature when you use lead-free paste.

◆Selection of Flux

1-1. When too much halogenated substance（Chlorine, etc.）content is used to activate the ﬂux, or highly acidic ﬂux is used, an excessive amount of residue

after soldering may lead to corrosion of the terminal electrodes or degradation of insulation resistance on the surface of the Inductor.

1-2. Flux is used to increase solderability in ﬂow soldering, but if too much is applied, a large amount of ﬂux gas may be emitted and may detrimentally affect

solderability. To minimize the amount of ﬂux applied, it is recommended to use a ﬂux-bubbling system.

1-3. Since the residue of water-soluble ﬂux is easily dissolved by water content in the air, the residue on the surface of Inductor in high humidity conditions may

cause a degradation of insulation resistance and therefore affect the reliability of the components. The cleaning methods and the capability of the machines

used should also be considered carefully when selecting water-soluble ﬂux.

◆Soldering

1-1. Preheating when soldering

Heating: Chip inductor components should be preheated to within 100 to 130℃ of the soldering. Cooling: The temperature difference between the

components and cleaning process should not be greater than 100℃.

Chip inductors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling. Therefore, the soldering process must be

conducted with a great care so as to prevent malfunction of the components due to excessive thermal shock.

Recommended conditions for soldering

［Reﬂow soldering］

Temperature proﬁle

Temperature（℃）

（Pb free soldering）

300

Peak 260℃ max

10 sec max

200

100

0

Gradually

cooling

Preheating

150℃

60 sec min

Heating above 230℃

40 sec max

※Ceramic chip components should be preheated to

within 100 to 130℃ of the soldering.

※Assured to be reﬂow soldering for 2 times.

Caution

1. The ideal condition is to have solder mas（s ﬁllet）controlled to 1/2 to 1/3 of the thickness of the inductor, as shown below:

2. Because excessive dwell times can detrimentally affect solderability, soldering duration should be kept as close to recommended times as possible.

Technical

consider-

ations

［Wave soldering］

Temperature proﬁle

Temperature（℃）

（Pb free soldering）

300

Peak 260℃ max

10 sec max

200

100

0

Gradually

cooling

Preheating

150℃

120 sec min

※Ceramic chip components should be preheated to

within 100 to 130℃ of the soldering.

※Assured to be wave soldering for 1 time.

※Except for reﬂow soldering type.

Caution

1. Make sure the inductors are preheated sufﬁciently.

2. The temperature difference between the inductor and melted solder should not be greater than 100 to 130℃.

3. Cooling after soldering should be as gradual as possible.

4. Wave soldering must not be applied to the inductors designated as for reﬂow soldering only.

［Hand soldering］

Temperature proﬁle

Temperature（℃）

（Pb free soldering）

400

350℃ max

3 sec max

300

200

Gradually

cooling

⊿Ｔ

100

0

60 sec min

（※⊿ＴT190℃（3216Type max）, ⊿Ｔ≦ 130℃（3225

Type ming）

※It is recommended to use 20W soldering iron and

the tip is 1φor less.

※The soldering iron should not directly touch the

components.

※Assured to be soldering iron for 1 time.

Note: The above proﬁles are the maximum allowable

soldering condition, therefore these proﬁles are

not always recommended.

Caution

1. Use a 20W soldering iron with a maximum tip diameter of 1.0 mm.

2. The soldering iron should not directly touch the inductor.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP15

■ PRECAUTIONS

Precautions on the use of Multilayer chip Inductors, Multilayer chip inductors for high frequency, Multilayer chip bead Inductors

5. Cleaning

◆Cleaning conditions

1. When cleaning the PC board after the Inductors are all mounted, select the appropriate cleaning solution according to the type of ﬂux used and purpose of

the cleaning（e.g. to remove soldering ﬂux or other materials from the production process.）

2. Cleaning conditions should be determined after verifying, through a test run, that the cleaning process does not affect the inductor's characteristics.

Precautions

◆Cleaning conditions

1. The use of inappropriate solutions can cause foreign substances such as ﬂux residue to adhere to the inductor, resulting in a degradation of the inductor's

electrical propertie（s especially insulation resistance）.

2. Inappropriate cleaning condition（s insufﬁcient or excessive cleaning）may detrimentally affect the performance of the inductors.

Technical

consider-

ations

（1）Excessive cleaning

a. In the case of ultrasonic cleaning, too much power output can cause excessive vibration of the PC board which may lead to the cracking of the inductor

or the soldered portion, or decrease the terminal electrodes' strength. Thus the following conditions should be carefully checked;

Ultrasonic output

Ultrasonic frequency

Ultrasonic washing period

Below 20W/ℓ

Below 40kHz

5 min. or less

6. Post cleaning processes

◆Application of resin coatings, moldings, etc. to the PCB and components.

1. With some type of resins a decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal

storage conditions resulting in the deterioration of the inductor's performance.

2. When a resin's hardening temperature is higher than the inductor's operating temperature, the stresses generated by the excess heat may lead to inductor

damage or destruction.

3. Stress caused by a resin's temperature generated expansion and contraction may damage inductors.

Precautions

7. Handling

The use of such resins, molding materials etc. is not recommended.

◆Breakaway PC board（s splitting along perforations）

1. When splitting the PC board after mounting inductors and other components, care is required so as not to give any stresses of deﬂection or twisting to the

board.

2. Board separation should not be done manually, but by using the appropriate devices.

◆General handling precautions

1. Always wear static control bands to protect against ESD.

2. Keep the inductors away from all magnets and magnetic objects.

Precautions

3. Use non-magnetic tweezers when handling inductors.

4. Any devices used with the inductors（soldering irons, measuring instruments）should be properly grounded.

5. Keep bare hands and metal product（s i.e., metal desk）away from chip electrodes or conductive areas that lead to chip electrodes.

6. Keep inductors away from items that generate magnetic ﬁelds such as speakers or coils.

◆Mechanical considerations

1. Be careful not to subject the inductors to excessive mechanical shocks.

（1）If inductors are dropped on the ﬂoor or a hard surface they should not be used.

（2）When handling the mounted boards, be careful that the mounted components do not come in contact with or bump against other boards or components.

8. Storage conditions

◆Storage

1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control temperature and

humidity in the storage area. Humidity should especially be kept as low as possible.

Recommended conditions

Ambient temperature Below 40℃

Precautions

Humidity

Below 70% RH

The ambient temperature must be kept below 30℃. Even under ideal storage conditions inductor electrode solderability decreases as time passes, so

inductors should be used within 6 months from the time of delivery.

*The packaging material should be kept where no chlorine or sulfur exists in the air.

◆Storage

Technical

consider-

ations

1. If the parts are stocked in a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes

and deterioration of taping/packaging materials may take place. For this reason, components should be used within 6 months from the time of delivery. If

exceeding the above period, please check solderability before using the inductors.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlci0109_reli_e-01

mlci0109_reli-PRP16

型号:	BK1005HS800
是否无铅：	不含铅
是否Rohs认证：	符合
生命周期：	Active
包装说明：	ROHS COMPLIANT PACKAGE
Reach Compliance Code：	compliant
ECCN代码：	EAR99
HTS代码：	8504.50.80.00
风险等级：	5.77
外壳代码：	0402
构造：	Chip Bead
最大直流电阻：	0.1 Ω
滤波器类型：	FERRITE CHIP
最大频率：	100 MHz
最小频率：	100 MHz
高度：	0.5 mm
JESD-609代码：	e3
长度：	1 mm
材料：	Ferrite
安装类型：	SURFACE MOUNT
最高工作温度：	125 °C
最低工作温度：	-55 °C
输出阻抗：	80 OHM Ω
物理尺寸：	L1XB.5XH.5 (mm)/L.0394XB.0197XH.0197 (inch)
额定电流：	0.7 A
子类别：	Other Filters
端子面层：	Matte Tin (Sn) - with Nickel (Ni) barrier
宽度：	0.5 mm
Base Number Matches：	1

电子百科

产品导航

产品型号BK1005HS800的Datasheet PDF文件预览

BK1005HS800相关产品

BK1005HS800相关文章

IC37:专业IC行业平台