This game was made for Mağara Jam '23 in 72 hours...

A robot, a walkie-talkie, a human and a lot of gadgets!

All the stuff has to be somehow processed the way the robot wants and sent to the reactor, or else...

 

Controls

Movement; W,A,S,D

Changing Tool; 1(Grappling), 2(Screwdriver), 3(Hammer)

Grappling Usage; Mouse Right Click

Screwdriver Usage; Mouse Left Click

Picking up Pieces; Mouse Left Click

Dropping Gadget; Q

Crouch; CTRL

Gameplay

Green; ''Raw Materials'' - Goes to 3D printer

Red; ''Trash'' - Goes to Grinder

Orange; ''Faulty Piece'' - Goes to Melter

Black; Ready to Assemble!

When you start the game, a robot will greet you. As soon as you follow the instructions and press the green button on the table, some pieces will fall in front of you. Some colors will appear around the pieces as outline. These colors determine which class the item belongs to and which platform it should go to.

You will see a Draft of the item you will make on the table, you need to put the object that represents it on the points there. If you put a wrong piece in a wrong place, you can remove it with a hammer.

Some pieces will have screws on them, you can use the screwdriver to insert the screws. You must put the faulty parts into the Melter, which is one of the lower platforms, and you must put the material coming out of the melter into the 3D Printer on the upper floor.

You can already understand, which platform you need to take the item to by the colors.

When you complete the Blueprint on the table, press the green button. If you press the red, button you will cancel the current blueprint and get the parts of the next item.

And finally, the "battery" must go to the Charging Station. Don't forget to remove the battery when the yellow light on the charger turns green, otherwise the battery will explode. Don't worry, you can take the exploded battery to the 3D Printer and charge it again.

If you;

Used a wrong piece,

Didn't insert the screws,

Didn't grind the Trashes,

you make a mistake and you earn error points. When all the Blueprints are completed, the day ends and you start a new day. At the end of the 3rd day, your performance will be evaluated based on your total score. Good luck!

 

NOTES

All Models, Drawings, Sounds, Music  and other Assets in the game were prepared by our fellow team during the Jam.

Our member, Oskar Pernal, who voices the robot, does not speak any Turkish. ^^

Short Note: There are 3 endings in our game, we hope you can experience them all!

Another Short Note: In order to give you a more intense experience, we made our game a little challenging. We hope you will have a more satisfying gameplay as you explore the mechanics more! GIT GUT >:D

 

Known Bugs

The 3D Printer can rarely malfunction; if you take the item out of the 3D printer as soon as it comes out, the item falls quickly to the ground. If you wait 2 seconds after the item comes out of the 3D printer and then take it, this problem will not occur.

If the buttons are pressed after the day is over, an extra penalty is charged. We recommend that you return to the Exit Gate after the day is over.

 

FaDeOs Crew

Furkan Özkan - Programming & Art Directing & Game Design

David Miksanek - Game Design & 2D Art

Oskar Pernal - Programming & Voiceover

 

Avni Kirman - Art Lead & 3D Art & Level Design

Eren Coşan - Music & SFX & Voiceover