Client (computer software) for Famicom/NES Dumper/Programmer

This is a client for the Famicom Dumper/Programmer.

The old version of the dumper is also partically supported.

It runs on Windows (x86, x64, arm, arm64), Linux (x64, arm, arm64) and OSX (x64, arm64)

Requirements

.NET 6.0 is required. You need to either install the ASP.NET Core Runtime framework or to use the self-contained version.

Features

It can be used to:

Dump Famicom/NES cartridges using C# scripts to describe any mapper. Scripts for the most popular mappers are included.
Reverse engineer unknown mappers using C# scripts
Read/write battery-backed PRG RAM to transfer game saves
Read/write Famicom Disk System cards
(Re)write ultra-cheap COOLBOY cartridges either with soldering (old revisions) or solder-free (new) versions. It also supports both "COOLBOY" (with $600x registers) and "MINDKIDS" (with $500x registers)
(Re)write COOLGIRL cartridges
(Re)write UNROM-512 (Nesmaker) cartridges
Test cartridge hardware
Do everything described above over the network
Access the dumper from your C#, C++, Dart, Go, Java, Kotlin, Node, Objective-C, PHP, Python, Ruby, etc. code using gRPC

Usage

It's a command-line application.

Usage: famicom-dumper <command> [options]

Available commands:

list-mappers - list available mappers to dump
dump - dump cartridge
server - start gRPC server
script - execute C# script specified by --cs-file option
reset - simulate reset (M2 goes to Z-state for a second)
dump-fds - dump FDS card using RAM adapter and FDS drive
write-fds - write FDS card using RAM adapter and FDS drive
read-prg-ram - read PRG RAM (battery backed save if exists)
write-prg-ram - write PRG RAM
write-coolboy - write COOLBOY cartridge
write-coolboy-gpio - write COOLBOY cartridge using dumper's GPIO pins
write-coolgirl - write COOLGIRL cartridge
write-unrom512 - write UNROM-512 cartridge
info-coolboy - show information about COOLBOY cartridge's flash memory
info-coolboy-gpio - show information about COOLBOY cartridge's flash memory using dumper's GPIO pins
info-coolgirl - show information about COOLGIRL cartridge's flash memory
info-unrom512 - show information about UNROM-512 cartridge's flash memory

Available options:

--port <com> - serial port of dumper or serial number of dumper device, default - auto
--tcp-port <port> - TCP port for gRPC communication, default - 26673
--host <host> - enable gRPC client and connect to the specified host
--mappers <directory> - directory to search mapper scripts
--mapper <mapper> - number, name or path to C# script of mapper for dumping, default - 0 (NROM)
--file <output.nes> - output/input filename (.nes, .fds, .sav, etc.)
--prg-size <size> - size of PRG memory to dump, you can use "K" or "M" suffixes
--chr-size <size> - size of CHR memory to dump, you can use "K" or "M" suffixes
--prg-ram-size - size of PRG RAM memory for NES 2.0 header, you can use "K" or "M" suffixes
--chr-ram-size - size of CHR RAM memory for NES 2.0 header, you can use "K" or "M" suffixes
--prg-nvram-size - size of PRG NVRAM memory for NES 2.0 header, you can use "K" or "M" suffixes
--chr-nvram-size - size of CHR NVRAM memory for NES 2.0 header, you can use "K" or "M" suffixes
--battery - set "battery" flag in ROM header after dumping
--cs-file <C#_file> - execute C# script from file
--reset - simulate reset first
--unif-name <name> - internal ROM name for UNIF dumps
--unif-author <name> - author of dump name for UNIF dumps
--fds-sides <sides> - number of FDS sides to dump (default - 1)
--fds-skip-sides <sides> - number of FDS sides to skip while writing (default - 0)
--fds-no-header - do not add header to output file during FDS dumping
--fds-dump-hidden - try to dump hidden files during FDS dumping (used for some copy-protected games)
--coolboy-submapper <submapper number> - submapper number to use while writing COOLBOY (default - auto, based on a ROM header)
--bad-sectors <bad_sectors> - comma separated list of bad sectors for COOLBOY/COOLGIRL writing
--ignore-bad-sectors - ignore bad sectors while writing COOLBOY/COOLGIRL
--verify - verify COOLBOY/COOLGIRL/UNROM-512/FDS after writing
--lock - write-protect COOLBOY/COOLGIRL sectors after writing
--sound - play sound when done or error occured

Notes

--port option can be used to specify COM port number as "COMx" on Windows or as path to serial port device on Linux. Also, if you are using old version of the dumper, you can specify FT232 chip serial number. If this option is not not specified, port will be detected automatically based on the device name.

--mapper option can be mapper script filename, mapper number or mapper name. If it's specified as a filename, the program will look for it in /mappers directory and /usr/share/famicom-dumper/mappers directory (on *nix systems). --mappers option can be used to override directory to search. Same directories will be used to search mapper script when mapper number or mapper name is specified. Mapper number can be specified as . in case when submapper is non-zero. Full file path also can be used.

--file option used in multiple cases. It's used to specify output filename when dumping cartridge. Output format will be detected based on extension: ".nes" for iNES or NES 2.0, .unf for UNIF and ".bin" for raw binary file. NES 2.0 container will be used in cases: when submapper is non-zero or one if the options --prg-ram-size, --chr-ram-size, --prg-nvram-size, --chr-nvram-size is set. FDS container will be used in case of dumping FDS cards. In case of cartridge/disk writing this options is used to specify input file name. File format also will be detected based on file extension.

--prg-size and --chr-size options will override default cartridge memory size when dumping.

--cs-file is used with script command usually. But it's also used in case when other command is specified: script will be executed before other actions. The program will look for the script in /scripts directory and /usr/share/famicom-dumper/scripts directory (on *nix systems). Full file path also can be used.

--reset options will simulate reset before command execution. reset command can be used to perform reset only, without any other actions.

--lock option used to set PPB bits of flash memory for non-empty sectors (sectors with any non-FF bytes). It's used mostly to protect cartridge from self-erase in console. This protection bits is not permanent and will be cleared before cartridre rewrite.

--sound option used to play built-in "done" or "error" sound on Windows. "bell" sound will be used on *nix systems in case of errors and tripple "bell" when operation is done.

Mapper script files

Mapper scripts are written in C# language. Each script must contain class (any name allowed) that impliments IMapper interface.

public interface IMapper
{
    /// <summary>
    /// Name of the mapper
    /// </summary>
    string Name { get; }

    /// <summary>
    /// Number of the mapper to spore in the iNES header (-1 if none)
    /// </summary>
    int Number { get => -1; }

    /// <summary>
    /// Number of submapper (0 if none)
    /// </summary>
    byte Submapper { get => 0; }

    /// <summary>
    /// Name of the mapper to store in UNIF container (null if none)
    /// </summary>
    string UnifName { get => null; }

    /// <summary>
    /// Default PRG size to dump (in bytes)
    /// </summary>
    int DefaultPrgSize { get; }

    /// <summary>
    /// Default CHR size to dump (in bytes)
    /// </summary>
    int DefaultChrSize { get => 0; }

    /// <summary>
    /// This method will be called to dump PRG
    /// </summary>
    /// <param name="dumper">FamicomDumperConnection object to access cartridge</param>
    /// <param name="data">This list must be filled with dumped PRG data</param>
    /// <param name="size">Size of PRG to dump requested by user (in bytes)</param>
    void DumpPrg(IFamicomDumperConnection dumper, List<byte> data, int size = 0);

    /// <summary>
    /// This method will be called to dump CHR
    /// </summary>
    /// <param name="dumper">FamicomDumperConnection object to access cartridge</param>
    /// <param name="data">This list must be filled with dumped CHR data</param>
    /// <param name="size">Size of CHR to dump requested by user (in bytes)</param>
    void DumpChr(IFamicomDumperConnection dumper, List<byte> data, int size = 0)
        => throw new NotSupportedException("This mapper doesn't have a CHR ROM");

    /// <summary>
    /// This method will be called to enable PRG RAM
    /// </summary>
    /// <param name="dumper"></param>
    void EnablePrgRam(IFamicomDumperConnection dumper)
        => throw new NotImplementedException("PRG RAM is not supported by this mapper");

    /// <summary>
    /// This method must return mirroring type, it can call dumper.GetMirroring() if it's fixed
    /// </summary>
    /// <param name="dumper">FamicomDumperConnection object to access cartridge</param>
    /// <returns>Mirroring type</returns>
    MirroringType GetMirroring(IFamicomDumperConnection dumper) => dumper.GetMirroring();

    /// <summary>
    /// Default PRG RAM size, can be used with NES 2.0
    /// </summary>
    public int DefaultPrgRamSize { get => -1; }

    /// <summary>
    /// Default CHR RAM size, can be used with NES 2.0
    /// </summary>
    public int DefaultChrRamSize { get => -1; }

    /// <summary>
    /// Default PRG NVRAM size, can be used with NES 2.0
    /// </summary>
    public int DefaultPrgNvramSize { get => -1; }

    /// <summary>
    /// Default CHR NVRAM size, can be used with NES 2.0
    /// </summary>
    public int DefaultChrNvramSize { get => -1; }
}

FamicomDumperConnection implements IFamicomDumperConnection interface:

public interface IFamicomDumperConnection : IDisposable
{
    /// <summary>
    /// Simulate reset (M2 goes to Z-state for a second)
    /// </summary>
    void Reset();

    /// <summary>
    /// Read single byte from CPU (PRG) bus
    /// </summary>
    /// <param name="address">Address to read from</param>
    /// <returns>Data from CPU (PRG) bus</returns>
    byte ReadCpu(ushort address);
    
    /// <summary>
    /// Read data from CPU (PRG) bus
    /// </summary>
    /// <param name="address">Address to read from</param>
    /// <param name="length">Number of bytes to read</param>
    /// <returns>Data from CPU (PRG) bus</returns>
    byte[] ReadCpu(ushort address, int length);

    /// <summary>
    /// Read single byte from PPU (CHR) bus
    /// </summary>
    /// <param name="address">Address to read from</param>
    /// <returns>Data from PPU (CHR) bus</returns>
    byte ReadPpu(ushort address);

    /// <summary>
    /// Read data from PPU (CHR) bus
    /// </summary>
    /// <param name="address">Address to read from</param>
    /// <param name="length">Number of bytes to read</param>
    /// <returns>Data from PPU (CHR) bus</returns>
    byte[] ReadPpu(ushort address, int length);

    /// <summary>
    /// Write data to CPU (PRG) bus
    /// </summary>
    /// <param name="address">Address to write to</param>
    /// <param name="data">Data to write, address will be incremented after each byte</param>
    void WriteCpu(ushort address, params byte[] data);

    /// <summary>
    /// Write data to PPU (CHR) bus
    /// </summary>
    /// <param name="address">Address to write to</param>
    /// <param name="data">Data to write, address will be incremented after each byte</param>
    void WritePpu(ushort address, params byte[] data);

    /// <summary>
    /// Read Famicom Disk System blocks
    /// </summary>
    /// <param name="startBlock">First block number to read (zero-based)</param>
    /// <param name="maxBlockCount">Maximum number of blocks to read</param>
    /// <returns>Array of Famicom Disk System blocks</returns>
    public (byte[] Data, bool CrcOk, bool EndOfHeadMeet)[] ReadFdsBlocks(byte startBlock = 0, byte maxBlockCount = byte.MaxValue);

    /// <summary>
    /// Write blocks to Famicom Disk System card
    /// </summary>
    /// <param name="blockNumbers">Block numbers to write (zero-based)</param>
    /// <param name="blocks">Raw blocks data</param>
    void WriteFdsBlocks(byte[] blockNumbers, byte[][] blocks);

    /// <summary>
    /// Write single block to Famicom Disk System card
    /// </summary>
    /// <param name="blockNumbers">Block number to write (zero-based)</param>
    /// <param name="block">Raw block data</param>
    void WriteFdsBlocks(byte blockNumber, byte[] block);

    /// <summary>
    /// Read raw mirroring values (CIRAM A10 pin states for different states of PPU A10 and A11)
    /// </summary>
    /// <returns>Values of CIRAM A10 pin for $2000-$23FF, $2400-$27FF, $2800-$2BFF and $2C00-$2FFF</returns>
    bool[] GetMirroringRaw();

    /// <summary>
    /// Read decoded current mirroring mode
    /// </summary>
    /// <returns>Current mirroring</returns>
    MirroringType GetMirroring();
}

Check "mappers" directory for examples.

Other scripts

You can create and run custom C# scripts to interact with dumper and cartridge. It's usefull for reverse engineering. Each script must contain class (any name allowed) that contains Run method. You can specify those parameters in any order:

IFamicomDumperConnection dumper - dumper object used to access dumper
string filename - filename specified by --file argument
IMapper mapper - mapper object compiled from mapper script specified by --mapper argument
int prgSize - PRG size specified by --prg-size argument (parsed)
int chrSize - CHR size specified by --chr-size argument (parsed)
int prgRamSize - PRG RAM size specified by --prg-ram-size argument (parsed)
int chrRamSize - CHR RAM size specified by --chr-ram-size argument (parsed)
int prgNvramSize - PRG NVRAM size specified by --prg-nvram-size argument (parsed)
int chrNvramSize - CHR NVRAM size specified by --chr-nvram-size argument (parsed)
string unifName - string specified by --unif-name argument
string unifAuthor - string specified by --unif-author argument
bool battery - true if --battery argument is specified
string[] args - additional command line arguments

You can specify additional arguments this way: >famicom-dumper script --cs-file DemoScript.cs - argument1 argument2 argument3

Always define default value if parameter is optional. The only exception is the "mapper" parameter, the "NROM" mapper will be used by default. Also args will be a zero-length array if additional arguments are not specified.

Example:

class DemoScript // Class name doesn't matter
{
    void Run(IFamicomDumperConnection dumper, string[] args, IMapper mapper, int prgSize = 128 * 1024, int chrSize = -1)
    {
        if (mapper.Number >= 0)
            Console.WriteLine($"Using mapper: #{mapper.Number} ({mapper.Name})");
        else
            Console.WriteLine($"Using mapper: {mapper.Name}");

        if (chrSize < 0)
        {
            // Oh no, CHR size is not specified! Lets use mapper's default
            chrSize = mapper.DefaultChrSize;
        }

        Console.WriteLine($"PRG size: {prgSize}");
        Console.WriteLine($"CHR size: {chrSize}");

        if (args.Any())
            Console.WriteLine("Additional command line arguments: " + string.Join(", ", args));

        // You can use other methods
        Reset(dumper);
    }

    void Reset(IFamicomDumperConnection dumper)
    {
        Console.Write("Reset... ");
        dumper.Reset();
        Console.WriteLine("OK");
    }
}

Script will be compiled and Run method will be executed if --cs-file option is specified. Also you can use NesFile and UnifFile containers.

You can run script alone like this:

famicom-dumper script --cs-file DemoScript.cs

Or execute it before main action like this:

famicom-dumper dump --mapper MMC3 --file game.nes --cs-file DemoScript.cs

So you can write your own code to interact with dumper object and read/write data from/to cartridge. This dumper object can be even on another PC (read below)! Check "scripts" directory for example scripts.

gRPC

You can start this application as gRPC server on one PC:

famicom-dumper server --port COM14

And dump cartridge over the network using another PC:

famicom-dumper dump --mapper CNROM --file game.nes --host example.com

It's useful if you want to reverse engineer cartridge of your remote friend. You can use all commands and scripts to interact with remote dumper just like it's connected locally.

Also you can use gRPC to access dumper from other applications or your own code written in C#, C++, Dart, Go, Java, Kotlin, Node, Objective-C, PHP, Python, Ruby, etc. languages. Use Dumper.proto to automatically generate client code.

Examples

Dump NROM-cartridge using dumper on port "COM14" to the file "game.nes". PRG and CHR sizes are default.

 > famicom-dumper dump --port COM14 --mapper nrom --file game.nes
 Dumper initialization... OK
 Using mapper: #0 (NROM)
 Dumping...
 PRG memory size: 32K
 Dumping PRG... OK
 CHR memory size: 8K
 Dumping CHR... OK
 Mirroring: Horizontal
 Saving to game.nes... OK

Dump MMC1-cartridge (iNES mapper #1) using dumper with FTDI serial number "A9Z1A0WD" and save it to game.nes file. PRG size is 128 kilobytes, CHR size is 128 kilobytes too.

>famicom-dumper dump --port A9Z1A0WD --mapper 1 --prg-size 128K --chr-size 128K --file game.nes
Dumper initialization... OK
Using mapper: #1 (MMC1)
Dumping...
PRG memory size: 128K
Reading PRG bank #0... OK
Reading PRG bank #1... OK
Reading PRG bank #2... OK
Reading PRG bank #3... OK
...
Saving to game.nes... OK

Dump 32K of PRG and 8K of CHR as simple NROM cartridge but execute C# script first:

>famicom-dumper dump --port /dev/ttyUSB0 --mapper 0 --prg-size 32K --chr-size 8K --file game.nes --cs-file init.cs
Dumper initialization... OK
Compiling init.cs...
Running init.Run()...
Dumping...
PRG memory size: 32K
Dumping PRG... OK
CHR memory size: 8K
Dumping CHR... OK
Mirroring: Horizontal
Saving to game.nes... OK

Dump 32MBytes of COOLBOY cartridge using C# script and save it as UNIF file with some extra info:

>famicom-dumper dump --port COM14 --mapper mappers\coolboy.cs --prg-size 32M --file coolboy.unf --unifname "COOLBOY 400-IN-1" --unifauthor "John Smith"
Dumper initialization... OK
Using mapper: COOLBOY
Dumping...
PRG memory size: 32768K
Reading PRG banks #0/0 and #0/1...
Reading PRG banks #0/2 and #0/3...
Reading PRG banks #0/4 and #0/5...
...
Saving to coolboy.unf... OK

Dump 32MBytes of COOLBOY cartridge using C# script and save it as NES 2.0 file with some extra info:

>famicom-dumper dump --port COM14 --mapper mappers\coolboy.cs --prg-size 32M --file coolboy.nes --prg-nvram-size 8K --chr-ram-size 256K
Dumper initialization... OK
Using mapper: COOLBOY
Dumping...
PRG memory size: 32768K
Reading PRG banks #0/0 and #0/1...
Reading PRG banks #0/2 and #0/3...
Reading PRG banks #0/4 and #0/5...
...
Saving to coolboy.unf... OK

Read battery-backed save from MMC1 cartridge:

>famicom-dumper read-prg-ram --port COM14 --mapper mmc1 --file zelda.sav
Dumper initialization... OK
Using mapper: #1 (MMC1)
Reading PRG-RAM... OK

Write battery-backed save back to MMC1 cartridge:

>famicom-dumper write-prg-ram --port COM14 --mapper mmc1 --file zelda_hacked.sav
Dumper initialization... OK
Using mapper: #1 (MMC1)
Writing PRG-RAM... OK

Rewrite ultracheap chinese COOLBOY cartridge and play sound when it's done:

>famicom-dumper write-coolboy --port COM14 --file "CoolBoy 400-in-1 (Alt Version, 403 games)(Unl)[U][!].nes" --sound
Dumper initialization... OK
Reset... OK
Erasing sector... OK
Writing 1/2048 (0%, 00:00:02/00:40:53)...
...

Also you can write COOLGIRL cartridges:

>famicom-dumper write-coolgirl --file multirom.unf --port COM14
Dumper initialization... OK
Reset... OK
Erasing sector... OK
Writing bank #0/114 (0%, 00:00:02/00:00:02)... OK
Writing bank #1/114 (0%, 00:00:02/00:00:02)... OK
Writing bank #2/114 (1%, 00:00:02/00:00:02)... OK
Writing bank #3/114 (2%, 00:00:02/00:00:02)... OK
Erasing sector... OK
Writing bank #4/114 (3%, 00:00:03/00:00:29)... OK
...

Dump two-sided Famicom Disk System card:

>famicom-dumper dump-fds --fds-sides 2 --file game.fds
Autodetected virtual serial port: COM13
Dumper initialization... OK
Reading disk... Done
Disk info block:
 Game name: MET
 Manufacturer code: Nintendo
 Game type: normal disk
 Game version: 2
 Disk number: 0
 Disk side: A
 Actual disk side: $FF
 Disk type: FMS
 Manufacturing date: 1986.09.09
 Country code: Japan
 Disk writer serial number: $0961
 Disk rewrite count: 0
 Price code: $FF
Number of non-hidden files: 15
...
Please remove disk card... OK
Please set disk card, side #2...
...
Saving to game.fds... OK

Write Famicom Disk System card and verify written data:

>famicom-dumper write-fds --verify --file "Super Mario Brothers 2 (Japan).fds"
Autodetected virtual serial port: COM6
Dumper initialization... OK
Please set disk card, side #1... OK
Disk info block:
 Game name: SMB
 Manufacturer code: Nintendo
 Game type: normal disk
 Game version: 0
 Disk number: 0
 Disk side: A
 Actual disk side: A
 Disk type: FMS
 Manufacturing date: 1986.07.23
 Country code: Japan
 Disk writer serial number: $FFFF
 Disk rewrite count: 0
 Price code: $00
Number of non-hidden files: 8
Number of hidden files: 0
Total blocks to write: 18
Writing block(s): 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17... OK
Starting verification process
Reading disk... Done
Verification successful.

Start server on TCP port 9999 and let other person to dump cartridge over network:

>famicom-dumper server --tcp-port 9999
Autodetected virtual serial port: COM13
Dumper initialization... OK
Listening port 9999, press Ctrl-C to stop

Connect to remote dumper using TCP port 9999 and execute C# script:

famicom-dumper script --cs-file DemoScript.cs --host clusterrr.com --tcp-port 9999
Dumper initialization... OK
Compiling DemoScript.cs...
Running DemoScript.Run()...

Download

You can always download the latest version at https://github.com/ClusterM/famicom-dumper-client/releases.

Also, you can download automatic interim builds at http://clusterm.github.io/famicom-dumper-client/.

Donate

Buy Me A Coffee
Donation Alerts
Boosty
BTC: 1MBYsGczwCypXhMBocoDQWxx7KZT2iiwzJ
PayPal is not available in Armenia :(

Name		Name	Last commit message	Last commit date
Latest commit History 395 Commits
.github		.github
FamicomDumper		FamicomDumper
FamicomDumperConnection		FamicomDumperConnection
.editorconfig		.editorconfig
.gitignore		.gitignore
.gitmodules		.gitmodules
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
famicom-dumper.sln		famicom-dumper.sln

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Client (computer software) for Famicom/NES Dumper/Programmer

Requirements

Features

Usage

Notes

Mapper script files

Other scripts

gRPC

Examples

Download

Donate

About

Releases 9

Sponsor this project

Packages

Contributors 7

Languages

License

ClusterM/famicom-dumper-client

Folders and files

Latest commit

History

Repository files navigation

Client (computer software) for Famicom/NES Dumper/Programmer

Requirements

Features

Usage

Notes

Mapper script files

Other scripts

gRPC

Examples

Download

Donate

About

Resources

License

Stars

Watchers

Forks

Releases 9

Sponsor this project

Packages 0

Contributors 7

Languages

Packages