Skip to content

tzaeschke/phtree

Repository files navigation

PH-Tree

Java 8

The PH-tree is a multi-dimensional indexing and storage structure. By default, it stores k-dimensional keys (points) consisting of k 64bit-integers. However, it can also be used to efficiently store floating point values and/or k-dimensional rectangles. It supports kNN (k nearest neighbor) queries, range queries, window queries and fast update/move/reinsert of individual entries. The PH-Tree is a map, it allows only one entry per position. A multimap with multiple entries per position can be implemented by using IDs (see PhTreeMultiMapF) or by storing collections at each position (PhTreeMultiMapF2). This document compares PH-Tree performance with other spatial indexes (Java only), made with TinSpin.

Documents

In 2019 and 2020 development was kindly supported by Improbable.

Other spatial indexes can be found in the TinSpin spatial index collection.

Java / Maven

<dependency>
    <groupId>ch.ethz.globis.phtree</groupId>
    <artifactId>phtree</artifactId>
    <version>2.8.1</version>
</dependency>

C++

There are several C++ implementations available:

Support

You can create GitHub Issues or contact me on Discord.

News

2024-06-22

Release 2.8.1

  • Fixed NPE problem with getStats() on empty tree
  • Fixed warning and refreshed dependencies

2023-07-29

Release 2.8.0 (2.7.0 was a dud)

  • Use MinMaxHeap for kNN in v13, v16 and v16HD.

2023-06-26

Release 2.6.0 / 2.6.1 / 2.6.2 / 2.6.3

  • Added new multimap: PhTreeMultiMapF2.

2020-04-30

Release 2.5.0

  • Added convenience API for multimap: PhTreeMultiMapF. This API emulates a PH-Tree that (unlike normal PH-Trees) support multiple entries for any coordinate. This is enabled by storing a unique identifier in an additional dimension. For performance reasons it is recommended to use small absolute values for IDs, such as 16bit or 32bit integers.

--> News Archive

Main Properties

There are currently two main versions, the classic PH-Tree (called PH1, latest implementation v13) and the new PH-Tree (called PH2, latest implementation v16/v16HD).

Note that the PH-Tree is a map that stores natively only one entry per key. To store multiple entries per key, please use a multimap wrapper such as:

  • PhTreeMultiMapF: a multimap which uses a unique ID as additional dimension (original multimap). It is stringly recommended that IDs are integers smaller than 2^32 for 64bit coordinates or smaller than 16-20bit for 32bit coordinates.
  • PhTreeMultiMapF2 a multimap which transparently stores a collection of values at a given point if (and only if) more than one value is associated with that point (new multimap, comparable performance with better usability)

Advantages

  • Memory efficient (PH1 only): Due to prefix sharing and other optimizations the tree may consume less memory than a flat array of integers/floats.
  • Update efficiency: The performance of insert(), update() and delete() operations is almost independent of the size of the tree. For low dimensions performance may even increase(!) with growing tree size (> 1M entries).
  • Small queries / spatial join: The PH-Tree (PH1 only) excels at 'small' window queries (small = small result size, such as 0 or 1). Experiments have shown that a brute force spatial join with the PH-Tree may be faster than dedicated solutions such as TOUCH (simulating experiments as described in the TOUCH paper, PH1 with 'multiply' preprocessing).
  • Scalability with size: The tree scales very with size especially with larger datasets with 1 million entries or more.
  • Scalability with dimension: Updates and 'contains()' scale almost horizontally with increasing dimensionality. Depending on the dataset, window queries may scale up to 20 dimensions or more. _k_NN (nearest neighbor) queries also scale well, much better than kD-trees, but can't quite compete with specialized solution such as CoverTree.
  • Skewed data: The tree works very well with skewed datasets, it actually prefers skewed datasets over evenly distributed datasets. However, see below (Data Preprocessing) for an exception.
  • Stability: The tree never performs rebalancing, but imbalance is inherently limited, so it is not a concern (maximum depth is 64, see paper). The advantages are that any modification operation will never modify more than one node in the tree. This limits the possible CPU cost and IO cost of update operations. It also makes is suitable for concurrency, see also the section on concurrency below.
  • IO / persistence: The nodes of PH2 use internally B+Trees. These lend themselves to page base storage, at least for higher dimensions where nodes contain more entries.

Disadvantages

  • The PH1 will not work with more than 62 dimensions. The PH2 supports up to 2^31 dimensions but at the cost of increased memory requirements.
  • Performance/size: the tree generally performs less well with smaller datasets, it is best used with 1 million entries or more.
  • Performance/dimensionality: depending on the dataset, performance of window queries may degrade when using data with more than 30 dimensions.
  • Data: The tree may degrade with extreme datasets, as described in the paper. However, it will still perform better than traditional KD-trees. Furthermore, the degradation can be avoided by preprocessing the data, see below.
  • Storage (PH1 only): The tree does not store references to the provided keys, instead it compresses the keys into in internal representation. As a result, when extracting keys (for example via queries), new objects (long[]) are created to carry the returned keys. This may cause load on the garbage collector if the keys are discarded afterwards. See the section about iterators below on some strategies to avoid this problem.
  • (= unexpected property) The PH-Tree is a map, it supports only one entry at each position. Storing multiple entries per position is possible by, for example, using the PhTreeMultiMapF (which uses a unique ID as additional dimension) or
  • PhTreeMultiMapF2 (which stores a collection of values at each point).

Generally

  • The tree performs best with large datasets with 1 million entries or more. Performance may actually increase with large datasets.
  • The tree performs best on window queries or nearest neighbor queries that return few result (window queries: 1-1000) because of the comparatively high extraction cost of values.

Differences to original PH-Tree

PH1 introduced:

  • Support for rectangle data
  • Support for k nearest neighbor queries
  • Dedicated update() method that combines put() and remove()
  • Automatic splitting of large nodes greatly improves update performance for data with more than 10 dimensions
  • General performance improvements and reduced garbage collection load

PH2 introduced:

  • Much simpler implementation based on B+Trees (instead of AHC/LHC nodes with bitstreaming).
  • Support for >62 dimensions, theoretical limit now 2^31 dimensions
  • New _k_NN nearest neighbor search following Hjaltason and Samet: "Distance browsing in spatial databases.".
  • Generally better insertion/update performance for dim>8

Interfaces / Abstract Classes

This archive contains four variants and multiple versions of the PH-tree.

The four variants are:

  • PhTree For point data with integer coordinates. This is the native storage format.
  • PhTreeF For point data with floating point coordinates.
  • PhTreeMultiMapF Same as PhTreeF, but allows multiple values for each coordinate by relying on a unique ID which is stored in an additional dimension.
  • PhTreeSolid For intervals/rectangles/boxes (solids) with integer coordinates.
  • PhTreeSolidF For intervals/rectangles/boxes (solids) with floating point coordinates.

They can be created with PhTreeXYZ.create(dimensions). This will create a PH1 tree (v13) for small dimensions, a PH2 (v16) for dimensions up to 60 and a PH2 (v16HD) if more dimensions are required. The old non-value API is still available in the tst folder. All queries return specialized iterators that give direct access to key, value or entry. The queryAll() methods return lists of entries and are especially useful for small result sets.

The packages ch.ethz.globis.pht.v* contain different versions of the PH-tree. They are the actual implementations of the four interfaces mentioned above. A higher version number usually (not always) indicates better performance in terms of base speed, scalability (size and dimensionality) as well as storage requirements.

Tuning Memory Usage vs Performance

Configuration (PH1)

Node.AHC_LHC_BIAS = 2.0: This defines when the tree should switch from LHC to AHC representation for a given node. With the given default of 2.0, the tree uses AHC unless it requires more than 2.0 times the memory of LHC. In practice this has only limited effect on memory, but a higher value tends to slightly increase performance of most operations. Commonly used values are 1.0, 1.5 and 2.0.

Node.NT_THRESHOLD = 150: This defines when the tree should switch from LHC or AHC to NT (nested tree) representation for a given node. With the given default of 150, the tree uses NT for any node that has more than 150 entries (children + key/value entries). NT representation requires a lot more memory than LHC, but it also speeds up insert, remove and update operations on large nodes. This parameters has profound impact on tree performance. For example, for dim=14, setting NT_THRESHOLD=15000 increases insertion time by 400%, but reduce query time by 40%. This also affect kNN queries. Element-exists queries (point queries) are not affected. Using higher values reduces memory consumption but slows down any modification to the node. Commonly values are 150, 250 and 400.

NtNode.MAX_DIM = 6: This defines the dimensionality of NT (nested tree) representation. For example, a d=20 dimensional node will be split in a d=6 root node, two levels of d=6 nodes below that any at the bottom a d=2 node. This adds up to 3*6+2=20. This was introduced to speed up modification (insert, remove, ...) of large nodes. Unfortunately, NT representation is very memory intensive. This setting has not been well researched. Higher values should reduce memory consumption at the cost of modification speed. Commonly used values are 4, 6 and 8.

Configuration (PH2)

PH2 is currently not configurable. There are hardcoded page sizes for the internal B+Tree that can be found in the Node class, but these should have little impact on performance.

Preprocessing and 32bit vs 64 bit

There is little point in using 32bit instead of 64bit integer values, because prefix sharing takes care of unused leading bits. For floating point values, using a 32bit float instead of 64bit float should reduce memory usage somewhat. However, it is usually better to convert floating point values to integer values by multiplying them with a constant. For example multiply by 10E6 to preserve 6 digit floating point precision. Also, chose the multiplier such that it is not higher than the precision requires. For example, if you have a precision of 6 digits after the decimal point, then multiply all values by 1,000,000 before casting the to (long) and adding them to the tree.

Garbage Collector

See also the section about iterators (below) on how to avoid GC from performing queries.

Perfomance Optimization

Suggestions for performance optimization can also be found in the PDF "The PH-Tree revisited", which is available in this repository.

Updates

For updating the keys of entries (AKA moving objects index), consider using update(). This function is about twice as fast for small displacements and at least as fast as a put()/remove() combination.

Choose a Type of Query

  • queryExtent(): Fastest option when traversing (almost) all of the tree
  • query(): Fastest option for for average result size > 50 (depending on data)
  • queryAll(): Fastest option for for average result size < 50 (depending on data)
  • nearestNeighbour(): Nearest neighbor query
  • rangeQuery(): Returns everything with a spherical range

Iterators (PH1)

All iterators return by default the value of a stored key/value pair. All iterators also provide three specialized methods nextKey(), nextValue() and nextEntry() to return only the key, only the value (just as next()) or the combined entry object. Iterating over the entry object has the disadvantage that the entries need to be created and create load on the GC (garbage collector). However, the entries provide easy access to the key, especially for SOLID keys.

The nextValue() and next() methods do not cause any GC (garbage collector) load and simply return the value associated with the result key. The nextKey() and nextEntry() always create new key objects or new key and additional PhEntry objects respectively. There are two ways to avoid this:

  • During insert, one could store the key as part of the value, for example insert(key, key). Then we can use the next() method to access the key without creating new objects. The disadvantage is that we are effectively storing the key twice, once as 'key' and once as 'value'. Since the PH-tree is quite memory efficient, this may still consume less memory than other trees.
  • During extraction, we can use the PhQuery.nextEntryReuse() method that is available in every iterator. It reuse PhEntry objects and key objects by resetting their content. Several calls to nextEntryReuse() may return the same object, but always with the appropriate content. The returned object is only valid until the next call to nextEntryReuse(). The disadvantage is that the key and PhEntry objects need to be copied if they are needed locally beyond the next call to nextEntryReuse().

Another way to reduce GC is to reuse the iterators when performing multiple queries. This can be done by calling PhQuery.reset(..), which will abort the current query and reset the iterator to the first element that fits the min/max values provided in the reset(..) call. This can be useful because an iterator consists of more than a hundred Java objects. In some scenarios this increased overall performance of about 20%.

Iterators (PH2)

In PH2, the iterators support the same interfaces as PH1, however there is less reuse happening. The reason is that PH2 does not compress keys internally and stores full entry objects. These can be directly returned. However, care should be taken that returned objects are not modified, because that may invalidate the tree.

Wrappers

Another optimization to avoid GC may be to avoid or reimplement the wrappers (PhTreeF, PhTreeSolid and PhTreeSolidF). With most calls they create internally temporary objects for coordinates that are passed on to the actual tree (for example it creates a long[] for every put or contains). A custom wrapper could reuse these temporary objects so that they cannot cause garbage collection.

Data Preprocessing

Default / IEEE

The default configuration of the PH-tree works quite well with most datasets. For floating point values it ensures that precision is fully maintained when points are converted to integer and back. The conversion is based on the IEEE bit representation, which is converted to an integer (see BitTools.toSortableLong()).

Multiply

To optimise performance, it is usually worth trying to preprocess the data by multiplying it with a large integer and then cast it to long. The multiplier should be chosen such that the required precision is maintained. For example, if 6 fractional digits are required, the multiplier should be at least 10e6 or 10e7. There are some helper classes that provide predefined preprocessors that can be plugged into the trees. For example, a 3D rectangle-tree with an integer multiplier of 10e9 can be created with:

PhTreeSolidF.create(3, new PreProcessorRangeF.Multiply(3, 10e9));

It is worth trying several multipliers, because performance may change considerably. For example, for one of our tests we multiplied with 10e9, which performed 10-20% better than 10e8 or 10e10. Typically, this oscillates with multiples of 1000, so 10e12 performs similar to 10e9.

Shift / Add

If data should be stored as floats in IEEE representation (BitTools.toSortableLong()), consider adding a constant such that the whole value domain falls into a single exponent. I.e. shift the values such that all values have the same exponent. It can also help to shift values such that all values have a positive sign.

Heterogeneous

Heterogeneous data (different data types and value ranges in each dimension) can be problematic for the PH-Tree when performing queries (insert, update, delete, contains should not be affected).

For heterogeneous data (combination of floats, integers, boolean, ...) consider shifting the values such that the min/max values in each dimension have a similar distance in the integer representation. For example a 3D tree: [0...10][10..30][0..1000] multiply the first dimension by 100 and the second by 50, so that all dimensions have a range of about 1000.

The above is true if all dimension are queried with similar selectivity. If range queries in the above example would mainly constrain the 2nd and 3rd dimension, then the first dimension should NOT be multiplied. In other words, the more selective queries are on a given dimension, the more wide should the dimension spread over the tree, i.e. the dimension should be given a higher multiplier.

API Support

Data preprocessing can be automated using the PreProcessor* classes (partly known as IntegerPP or ExponentPP in the PDF documentation).

Concurrency Support

The current has very limited support for concurrency.

Read Only Access

Read only access (all types of queries) can safely be done by any number of threads. No synchronization is required.

Read and Write Access

Any write access must be synchronized with any other concurrent write or read access (iterator.next() counts as read access). For example, a wrapper class could use a Java ReadWriteLock to ensure that write access is always exclusive:

	private final ReadWriteLock lock = new ReentrantReadWriteLock(true);
	
	public void put(...) {
		Lock wlock = lock.writeLock();
		try {
			tree.put(key, value);
		} finally {
			wlock.unlock();
		}
	}
	
	public <T> ArrayList<T> query(...) {
		ArrayList<T> result = new ArrayList<>();
		Lock rlock = lock.readLock();
		try {
		    //This could be optimized by reusing the query object
		    //with PhQuery.reset()
			PhQuery<T> it = tree.query(...);
			while (it.hasNext()) {
				result.add(it.next());
        	}
		} finally {
			rlock.unlock();
		}
		return result;
	}	

It should be possible to allow even more fine-grained access by also creating wrappers for the iterators, so that the read lock is only held during creation of the query and during each call to next(). Expected behavior: The query iterators may miss newly inserted entries or may return entries that have already been deleted. However, while this should work, it was never part of the current design and has not really been tested. If you find that it does not work (throws exception, missing entries that have not been modified, returns invalid data), let me know and I may fix it if it doesn't impact general tree performance.

Research

Generally, the PH-Tree should lend itself to concurrent implementations, because it is guaranteed that no call to put or remove will ever affect more than two nodes. In fact, only one node will ever be modified with possibly a second one added or removed.

There is a Master Thesis that explores concurrent implementations (copy on write, node level locking, ...), see Section 6.2 in Cluster-Computing and Parallelization for the Multi-Dimensional PH-Index. The source code is not maintained anymore and lacks a number of features of the latest PH-Tree (kNN queries, update, better performance, ...). However, I can make it available on request.

License / Copyright / Contributors

The code is licensed under the Apache License 2.0.

Copyright holders of different parts of the code are as follows.

The PH-tree (namespace ch.ethz): Copyright 2011-2016 by ETH Zurich, Institute for Information Systems, Universitätsstrasse 6, 8092 Zurich, Switzerland.

Copyright 2016-2023 by Tilmann Zäschke, zoodb@gmx.de.

Copyright 2019-2020 by Improbable Worlds Limited

The critbit tree (namespace org.zoodb) is copyright 2009-2023 by Tilmann Zäschke, zoodb@gmx.de. The critbit tree (and other spatial indexes) are also separately available here

Contact