Binaries, scripts and configuration files that go into the Raspberry Pi.
Tested on: Raspberry Pi Zero 2W running Raspbian OS Lite
sudo apt update
sudo apt install --yes --no-install-recommends supervisor git raspberrypi-kernel-headers
sudo cp serialread.conf /etc/supervisor/conf.d
mkdir -p /home/pi/bin
cp serialread.sh /home/pi/bin/
cd emlog
make -j$(nproc)
sudo make install
sudo depmod
sudo echo emlog >> /etc/modules # might need to run in root shell
sudo rebootCommunication between the CSI receiver ESP board and the Pi could be established by either UART or USB serial. You may want to configure the serialread.sh script accordingly.