Isolation levels and write conflicts on Azure Databricks
The isolation level of a table defines the degree to which a transaction must be isolated from modifications made by concurrent operations. Write conflicts on Azure Databricks depend on the isolation level.
Delta Lake provides ACID transaction guarantees between reads and writes. This means that:
- Multiple writers across multiple clusters can simultaneously modify a table partition. Writers see a consistent snapshot view of the table and writes occur in a serial order.
- Readers continue to see a consistent snapshot view of the table that the Azure Databricks job started with, even when a table is modified during a job.
See What are ACID guarantees on Azure Databricks?.
Note
Azure Databricks use Delta Lake for all tables by default. This article describes behavior for Delta Lake on Azure Databricks.
Important
Metadata changes cause all concurrent write operations to fail. These operations include changes to table protocol, table properties, or data schema.
Streaming reads fail when they encounter a commit that changes table metadata. If you want the stream to continue you must restart it. For recommended methods, see Production considerations for Structured Streaming.
The following are examples of queries that change metadata:
-- Set a table property.
ALTER TABLE table-name SET TBLPROPERTIES ('delta.isolationLevel' = 'Serializable')
-- Enable a feature using a table property and update the table protocol.
ALTER TABLE table_name SET TBLPROPERTIES ('delta.enableDeletionVectors' = true);
-- Drop a table feature.
ALTER TABLE table_name DROP FEATURE deletionVectors;
-- Upgrade to UniForm.
REORG TABLE table_name APPLY (UPGRADE UNIFORM(ICEBERG_COMPAT_VERSION=2));
-- Update the table schema.
ALTER TABLE table_name ADD COLUMNS (col_name STRING);
Write conflicts with row-level concurrency
Row-level concurrency reduces conflicts between concurrent write operations by detecting changes at the row-level and automatically resolving conflicts that occur when concurrent writes update or delete different rows in the same data file.
Row-level concurrency is generally available on Databricks Runtime 14.2 and above. Row-level concurrency is supported by default for the following conditions:
- Tables with deletion vectors enabled and without partitioning.
- Tables with liquid clustering, unless you have disabled deletion vectors.
Tables with partitions do not support row-level concurrency but can still avoid conflicts between OPTIMIZE
and all other write operations when deletion vectors are enabled. See Limitations for row-level concurrency.
For other Databricks Runtime versions, see Row-level concurrency preview behavior (legacy).
MERGE INTO
support for row-level concurrency requires Photon in Databricks Runtime 14.2. In Databricks Runtime 14.3 LTS and above, Photon is not required.
The following table describes which pairs of write operations can conflict in each isolation level with row-level concurrency enabled.
Note
Tables with identity columns do not support concurrent transactions. See Use identity columns in Delta Lake.
INSERT (1) | UPDATE, DELETE, MERGE INTO | OPTIMIZE | |
---|---|---|---|
INSERT | Cannot conflict | ||
UPDATE, DELETE, MERGE INTO | Cannot conflict in WriteSerializable. Can conflict in Serializable when modifying the same row. See Limitations for row-level concurrency. | Can conflict when modifying the same row. See Limitations for row-level concurrency. | |
OPTIMIZE | Cannot conflict | Can conflict when ZORDER BY is used. Cannot conflict otherwise. |
Can conflict when ZORDER BY is used. Cannot conflict otherwise. |
Important
(1) All INSERT
operations in the tables above describe append operations that do not read any data from the same table before committing. INSERT
operations that contain subqueries reading the same table support the same concurrency as MERGE
.
REORG
operations have isolation semantics identical to OPTIMIZE
when rewriting data files to reflect changes recorded in deletion vectors. When you use REORG
to apply an upgrade, table protocols change, which conflicts with all ongoing operations.
Write conflicts without row-level concurrency
The following table describes which pairs of write operations can conflict in each isolation level.
Tables do not support row-level concurrency if they have partitions defined or do not have deletion vectors enabled. Databricks Runtime 14.2 or above is required for row-level concurrency.
Note
Tables with identity columns do not support concurrent transactions. See Use identity columns in Delta Lake.
INSERT (1) | UPDATE, DELETE, MERGE INTO | OPTIMIZE | |
---|---|---|---|
INSERT | Cannot conflict | ||
UPDATE, DELETE, MERGE INTO | Cannot conflict in WriteSerializable. Can conflict in Serializable. See avoid conflicts with partitions. | Can conflict in Serializable and WriteSerializable. See avoid conflicts with partitions. | |
OPTIMIZE | Cannot conflict | Cannot conflict with in tables with deletion vectors enabled, unless ZORDER BY is used. Can conflict otherwise. |
Cannot conflict with in tables with deletion vectors enabled, unless ZORDER BY is used. Can conflict otherwise. |
Important
(1) All INSERT
operations in the tables above describe append operations that do not read any data from the same table before committing. INSERT
operations that contain subqueries reading the same table support the same concurrency as MERGE
.
REORG
operations have isolation semantics identical to OPTIMIZE
when rewriting data files to reflect changes recorded in deletion vectors. When you use REORG
to apply an upgrade, table protocols change, which conflicts with all ongoing operations.
Limitations for row-level concurrency
Some limitations apply for row-level concurrency. For the following operations, conflict resolution follows normal concurrency for write conflicts on Azure Databricks. See Write conflicts without row-level concurrency.
- Commands with complex conditional clauses, including the following:
- Conditions on complex data types such as structs, arrays, or maps.
- Conditions using non-deterministic expressions and subqueries.
- Conditions that contain correlated subqueries.
- In Databricks Runtime 14.2,
MERGE
commands must use an explicit predicate on the target table to filter rows matching the source table. For merge resolution, the filter only scans rows that might conflict based on filter conditions in concurrent operations.
Note
Row-level conflict detection can increase the total execution time. In the case of many concurrent transactions, the writer prioritizes latency over conflict resolution and conflicts may occur.
All limitations for deletion vectors also apply. See Limitations.
When does Delta Lake commit without reading the table?
Delta Lake INSERT
or append operations do not read the table state before committing if the following conditions are satisfied:
- Logic is expressed using
INSERT
SQL logic or append mode. - Logic contains no subqueries or conditionals that reference the table targeted by the write operation.
As in other commits, Delta Lake validates and resolves the table versions on commit using metadata in the transaction log, but no version of the table is actually read.
Note
Many common patterns use MERGE
operations to insert data based on table conditions. Although it might be possible to rewrite this logic using INSERT
statements, if any conditional expression references a column in the target table, these statements have the same concurrency limitations as MERGE
.
Write serializable vs. serializable isolation levels
The isolation level of a table defines the degree to which a transaction must be isolated from modifications made by concurrent transactions. Delta Lake on Azure Databricks supports two isolation levels: Serializable and WriteSerializable.
Serializable: The strongest isolation level. It ensures that committed write operations and all reads are Serializable. Operations are allowed as long as there exists a serial sequence of executing them one-at-a-time that generates the same outcome as that seen in the table. For the write operations, the serial sequence is exactly the same as that seen in the table’s history.
WriteSerializable (Default): A weaker isolation level than Serializable. It ensures only that the write operations (that is, not reads) are serializable. However, this is still stronger than Snapshot isolation. WriteSerializable is the default isolation level because it provides great balance of data consistency and availability for most common operations.
In this mode, the content of the Delta table may be different from that which is expected from the sequence of operations seen in the table history. This is because this mode allows certain pairs of concurrent writes (say, operations X and Y) to proceed such that the result would be as if Y was performed before X (that is, serializable between them) even though the history would show that Y was committed after X. To disallow this reordering, set the table isolation level to be Serializable to cause these transactions to fail.
Read operations always use snapshot isolation. The write isolation level determines whether or not it is possible for a reader to see a snapshot of a table, that according to the history, “never existed”.
For the Serializable level, a reader always sees only tables that conform to the history. For the WriteSerializable level, a reader could see a table that does not exist in the Delta log.
For example, consider txn1, a long running delete and txn2, which inserts data deleted by txn1. txn2 and txn1 complete and they are recorded in that order in the history. According to the history, the data inserted in txn2 should not exist in the table. For Serializable level, a reader would never see data inserted by txn2. However, for the WriteSerializable level, a reader could at some point see the data inserted by txn2.
For more information on which types of operations can conflict with each other in each isolation level and the possible errors, see Avoid conflicts using partitioning and disjoint command conditions.
Set the isolation level
You set the isolation level using the ALTER TABLE
command.
ALTER TABLE <table-name> SET TBLPROPERTIES ('delta.isolationLevel' = <level-name>)
where <level-name>
is Serializable
or WriteSerializable
.
For example, to change the isolation level from the default WriteSerializable
to Serializable
, run:
ALTER TABLE <table-name> SET TBLPROPERTIES ('delta.isolationLevel' = 'Serializable')
Avoid conflicts using partitioning and disjoint command conditions
In all cases marked “can conflict”, whether the two operations will conflict depends on whether they operate on the same set of files. You can make the two sets of files disjoint by partitioning the table by the same columns as those used in the conditions of the operations. For example, the two commands UPDATE table WHERE date > '2010-01-01' ...
and DELETE table WHERE date < '2010-01-01'
will conflict if the table is not partitioned by date, as both can attempt to modify the same set of files. Partitioning the table by date
will avoid the conflict. Therefore, partitioning a table according to the conditions commonly used on the command can reduce conflicts significantly. However, partitioning a table by a column that has high cardinality can lead to other performance issues due to the large number of subdirectories.
Conflict exceptions
When a transaction conflict occurs, you will observe one of the following exceptions:
ConcurrentAppendException
This exception occurs when a concurrent operation adds files in the same partition (or anywhere in an unpartitioned table) that your operation reads. The file additions can be caused by INSERT
, DELETE
, UPDATE
, or MERGE
operations.
With the default isolation level of WriteSerializable
, files added by blind INSERT
operations (that is, operations that blindly append data without reading any data) do not conflict with any operation, even if they touch the same partition (or anywhere in an unpartitioned table). If the isolation level is set to Serializable
, then blind appends may conflict.
This exception is often thrown during concurrent DELETE
, UPDATE
, or MERGE
operations. While the concurrent operations may be physically updating different partition directories, one of them may read the same partition that the other one concurrently updates, thus causing a conflict. You can avoid this by making the separation explicit in the operation condition. Consider the following example.
// Target 'deltaTable' is partitioned by date and country
deltaTable.as("t").merge(
source.as("s"),
"s.user_id = t.user_id AND s.date = t.date AND s.country = t.country")
.whenMatched().updateAll()
.whenNotMatched().insertAll()
.execute()
Suppose you run the above code concurrently for different dates or countries. Since each job is working on an independent partition on the target Delta table, you don’t expect any conflicts. However, the condition is not explicit enough and can scan the entire table and can conflict with concurrent operations updating any other partitions. Instead, you can rewrite your statement to add specific date and country to the merge condition, as shown in the following example.
// Target 'deltaTable' is partitioned by date and country
deltaTable.as("t").merge(
source.as("s"),
"s.user_id = t.user_id AND s.date = t.date AND s.country = t.country AND t.date = '" + <date> + "' AND t.country = '" + <country> + "'")
.whenMatched().updateAll()
.whenNotMatched().insertAll()
.execute()
This operation is now safe to run concurrently on different dates and countries.
ConcurrentDeleteReadException
This exception occurs when a concurrent operation deleted a file that your operation read. Common causes are a DELETE
, UPDATE
, or MERGE
operation that rewrites files.
ConcurrentDeleteDeleteException
This exception occurs when a concurrent operation deleted a file that your operation also deletes. This could be caused by two concurrent compaction operations rewriting the same files.
MetadataChangedException
This exception occurs when a concurrent transaction updates the metadata of a Delta table. Common causes are ALTER TABLE
operations or writes to your Delta table that update the schema of the table.
ConcurrentTransactionException
If a streaming query using the same checkpoint location is started multiple times concurrently and tries to write to the Delta table at the same time. You should never have two streaming queries use the same checkpoint location and run at the same time.
ProtocolChangedException
This exception can occur in the following cases:
- When your Delta table is upgraded to a new protocol version. For future operations to succeed you may need to upgrade your Databricks Runtime.
- When multiple writers are creating or replacing a table at the same time.
- When multiple writers are writing to an empty path at the same time.
See How does Azure Databricks manage Delta Lake feature compatibility? for more details.
Row-level concurrency preview behavior (legacy)
This section describes preview behaviors for row-level concurrency in Databricks Runtime 14.1 and below. Row-level concurrency always requires deletion vectors.
In Databricks Runtime 13.3 LTS and above, tables with liquid clustering enabled automatically enable row-level concurrency.
In Databricks Runtime 14.0 and 14.1, you can enable row-level concurrency for tables with deletion vectors by setting the following configuration for the cluster or SparkSession:
spark.databricks.delta.rowLevelConcurrencyPreview = true
In Databricks Runtime 14.1 and below, non-Photon compute only supports row-level concurrency for DELETE
operations.
Feedback
https://aka.ms/ContentUserFeedback.
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see:Submit and view feedback for