Upgrading to newer versions of Roundup

Please read each section carefully and edit the files in your tracker home accordingly. Note that there is information about upgrade procedures in the administration guide in the Software Upgrade section.

If a specific version transition isn’t mentioned here (e.g. 0.6.7 to 0.6.8) then you don’t need to do anything. If you’re upgrading from 0.5.6 to 0.6.8 though, you’ll need to apply the “0.5 to 0.6” and “0.6.x to 0.6.3” steps.

General steps:

  1. Make note of your current Roundup version.

  2. Take your Roundup installation offline (web, email, cron scripts, roundup-admin etc.)

  3. Backup your Roundup instance

  4. Install the new version of Roundup (preferably in a new virtual environment)

  5. Make version specific changes as described below for each version transition. If you are starting at 1.5.0 and installing to 2.3.0, you need to make the changes for all versions starting at 1.5 and ending at 2.3. E.G. 1.5.0 -> 1.5.1, 1.5.1 -> 1.6.0, …, 2.1.0 -> 2.2.0, 2.2.0 -> 2.3.0.

  6. Run roundup-admin -i <tracker_home> migrate using the newer version of Roundup for the instance you are upgrading. This will update the database if it is required.

  7. Bring your Roundup instance back online

  8. Test

Repeat for each tracker instance.

Note

The v1.5.x releases of Roundup were the last to support Python v2.5 and v2.6. Starting with the v1.6 releases of Roundup Python version 2.7 that is newer than 2.7.2 is required to run Roundup. Starting with Roundup version 2.0.0 we also support Python 3 versions newer than 3.6.

Recent release notes have the following labels:

  • required - Roundup will not work properly if these steps are not done

  • recommended - Roundup will still work, but these steps can cause security or stability issues if not done.

  • optional - new features or changes to existing features you might want to use

  • info - important possibly visible changes in how things operate

If you use virtual environments for your installation, you can run trackers with different versions of Roundup. So you can have one tracker using version 2.2.0 and another tracker using version 1.6.1. This allows you to upgrade trackers one at a time rather than having to upgrade all your trackers at once. Note that downgrading may require restoring your database to an earlier version, so make sure you backed up your database.

Note

This file only includes versions released in the last 10 years. If you are upgrading from an older version, start with the changes in the historical migration document.

Python 2 Support

If you are running Roundup under Python 2, you should make plans to switch to Python 3. Release 2.4.0 (Jul 2024) is the last release to officially support Python 2. The next non-patch release scheduled for 2025 will mark 5 years since Roundup supported Python 3.

XHTML Support Deprecation Notice

If you are running a tracker where the html_version setting in config.ini is xhtml, you should plan to change your templates to use html (HTML5). If you are affected by this, please send email to the roundup-users mailing list (roundup-users at lists.sourceforge.net). Version 2.3.0 is the last version to support XHTML.

Contents:

Migrating from 2.3.0 to 2.4.0

Update your config.ini (required)

Upgrade tracker’s config.ini file. Use:

roundup-admin -i /path/to/tracker updateconfig newconfig.ini

to generate a new ini file preserving all your settings. You can then merge any local comments from the tracker’s config.ini to newconfig.ini and replace config.ini with newconfig.ini.

updateconfig will tell you if it is changing old default values or if a value must be changed manually.

This will insert the bad API login rate limiting settings.

Also if you have html_version set to xhtml, you will get an error.

XHTML no longer supported (required)

If your config.ini sets html_version to xhtml, you need to change it to html. Then you need to change your tracker’s templates to html from xhtml.

Note that the default Roundup templates use html4 so it is unlikely that your templates are xhtml based. See issue2551323 for details on the deprecation of xhtml.

Update MySQL character set/collations (required)

issue2551282 and issue2551115 discuss issues with MySQL’s utf8 support. MySQL has variations on utf8 character support. This version of Roundup expects to use utf8mb4 which is a version of utf8 that covers all characters, not just the ones in the basic multilingual plane. Previous versions of Roundup used latin1 or utf8mb3 (also known as just utf8). Newer versions of MySQL are supposed to make utf8mb4 and not utf8mb3 the default.

To convert your database, you need to have MySQL 8.0.11 or newer (April 2018) and a mysql client.

Warning

This conversion can damage your database. Back up your database using mysqldump or other tools. Preferably on a quiet database. Verify that your database can be restored (or at least look up directions for restoring it). This is very important.

We suggest shutting down Roundup’s interfaces:

  • web

  • email

  • cron jobs that use Python or roundup-admin

then make your backup.

Then connect to your mysql instance using mysql with the information in config.ini. If your tracker’s config.ini includes:

name = roundupdb
host = localhost
user = roundupuser
password = rounduppw

you would run some version of:

mysql -u roundupuser --host localhost -p roundupdb

and supply rounduppw when prompted.

With the Roundup database quiet, convert the character set for the database and then for all the tables. To convert the tables you need a list of them. To get this run:

mysql -sN -u roundupuser --host localhost -p \
   -e 'show tables;' roundupdb > /tmp/tracker.tables

The -sN removes line drawing characters and column headers from the output. For each table <t> in the file, run:

ALTER TABLE `<t>` CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;

You can automate this conversion using sed:

sed -e 's/^/ALTER TABLE `/' \
 -e 's/$/` CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;/'\
 /tmp/tracker.tables> /tmp/tracker.tables.sql

The backticks “`” are required as some of the table names became MySQL reserved words during Roundup’s lifetime.

Inspect tracker.tables.sql to see if all the lines look correct. If so then we can start the conversion.

First convert the character set for the database by running:

mysql -u roundupuser --host localhost -p roundupdb

Then at the mysql> prompt run:

ALTER DATABASE roundupdb CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;

you should see: Query OK, 1 row affected (0.01 sec).

Now to modify all the tables run:

. /tmp/tracker.tables.sql

You will see output similar to:

Query OK, 5 rows affected (0.01 sec)
Records: 5  Duplicates: 0  Warnings: 0

for each table. The rows/records will depend on the number of entries in the table. This can take a while.

Once you have successfully completed this, copy your tracker’s config.ini to a backup file. Edit config.ini to use the defaults:

  • mysql_charset = utf8mb4

  • mysql_collation = utf8mb4_unicode_ci

  • mysql_binary_collation = utf8mb4_0900_bin

Also look for a ~/.my.cnf for the roundup user and make sure that the settings for character set (charset) are utf8mb4 compatible.

To test, run roundup-admin -i tracker_home and display an issue designator: e.g. display issue10. Check that the text fields are properly displayed (e.g. title). Start the web interface and browse some issues. Again, check that the text fields display correctly, that the history at the bottom of the issues displays correctly and if you are using the default full text search, make sure that that works.

If this works, bring email cron jobs etc. back online.

If this fails, take down the web interface, restore the database from backup, restore the old config.ini. Then test again and reach out to the mailing list for help.

We can use assistance in getting these directions corrected or enhanced. The core Roundup developers don’t use MySQL for their production workloads so we count on users to help us with this.

References:

Add new classhelper to your templates (optional)

The classic classhelper invoked by the (list) link in your issue.item.html template can be greatly improved by wrapping the links with the new web-component based roundup-classhelper.

The new classhelper:

  • allows you to select items from multiple pages

  • is usable with a content security policy

  • is more easily styled

To deploy it, install the required files and wrap classhelp calls in the new <roundup-classhelper> component. For example, wrap:

<span tal:condition="context/is_edit_ok" tal:replace="structure
   python:db.user.classhelp('username,realname,address',
   property='nosy', width='600'" />

so it looks like:

<roundup-classhelper
  data-search-with="username,phone,roles[]">

  <span tal:condition="context/is_edit_ok" tal:replace="structure
     python:db.user.classhelp('username,realname,address',
     property='nosy', width='600')" />

</roundup-classhelper>

to allow the user to search by: username, phone number and use a select/dropdown to search by role. Full details about the attributes and installation instructions can be found in the classhelper documentation in the admin guide.

Disable performance improvement for wsgi mode (optional)

In Roundup version 2.2.0, an experimental feature was introduced to enhance performance while operating in wsgi mode. Initially, this feature was disabled. Over the past two years, it has been used at a few sites without any reported problems.

As a result, the default setting now enables this performance improvement, encouraging a wider adoption of the feature. In the event that an undiscovered bug arises, it can still be disabled if you experience problems. To disable it, modify your wsgi startup script and add the feature_flags to the RequestDispatcher as below:

feature_flags = { “cache_tracker”: False } app = RequestDispatcher(tracker_home, feature_flags=feature_flags)

Then restart your wsgi instance. If you have to disable this feature, send email to the roundup-users mailing list (roundup-users at lists.sourceforge.net) so we can help you diagnose the cause and fix it for everybody.

In the future, support for disabling this improvement will be removed.

Fix duplicate id for confirm password in user.item.html (optional)

The TAL macro user_confirm_input at the end of html/page.html for all templates except jinja2 sets the id of the Confirm password input the same as the Login Password input. This creates an HTML error. Two items must not have the same id.

However browsers ignore the error and things still work. If you were to use css or javascript to target the password id, it would not work as expected.

To fix this, change the line near the end of your tracker’s html/page.html from:

tal:attributes="id name; name string:@confirm@$name; readonly not:edit_ok" value="">

to:

tal:attributes="id string:confirm_$name; name string:@confirm@$name; readonly not:edit_ok" value="">

This will change the id to confirm_password.

Merge changes from devel template task.index.html (optional)

The devel template’s task.index.html has some fields that are not defined in the schema. It looks like it was originally copied from the bug.index.html. If the task index is requested without specifying the columns/fields, the template will crash trying to display severity and other fields that don’t exist in the task schema.

In normal use, the left hand menu for tasks always specifies valid columns so you may not see this issue. However if you remove the @columns query parameter, you can see the error.

The removed columns are: severity, versions, keywords, dependencies.

It is also missing the solves field which is added to match the schema.

You can see the diff in the Sourceforge web interface.

Make group headers span all columns (optional)

In a number of index pages a version of the following TAL command appears:

<th tal:attributes="colspan python:len(request.columns)" class="group">

If the @columns parameter (aka request.columns) is not set, all columns are shown. However the group header only spans the first column. Changing this to read:

<th tal:attributes="colspan python:len(request.columns) or 100" class="group">

makes the group header span all the columns (if you have fewer than 100 columns). All of the supplied templates hae been upgraded with this change. See issue 2551341 for details.

Note the jinja2 template has the same issue, but the development team hasn’t devised a solution.

Use @current_user in Searches (optional)

You can create queries like: “My issues” by searching the creator property of issues for your id number. Similarly you can search for “Issues assigned to me” by searching on the assignedto property.

Queries in Roundup can be shared between users. However queries like these can be shared. However for any user but they will only find issues created by/assigned to the user who created the query.

This release allows you to search Links to the User class by specifying @current_user. This token searches for the currently log in user. It makes searches like the above usable when shared.

This only works for properties that are a Link to the user class. E.G. creator, actor, assignedto. It does not yet work for MultiLink properties (like nosy).

As an example this can be deployed to the classic tracker’s issue search template (issue.search.html), by replacing:

<option metal:fill-slot="extra_options" i18n:translate=""
        tal:attributes="value request/user/id">created by
        me</option>

with:

<option metal:fill-slot="extra_options" value="@current_user"
        tal:attributes="selected python:value == '@current_user'"
        i18n:translate="">created by me</option>

There are three places where value request/user/id is used in the classic template. Your template may have more.

If you have a user with the exact username of @current_user they should change it. Details can be found in issue1525113.

New PostgreSQL Settings (optional)

With this release, you can specify a Postgresql database schema to use. By default Roundup creates a database when using roundup-admin init. Setting the rdbms name keyword to roundup_database.roundup_schema will create and use the roundup_schema in the pre-created roundup_database. See the Roundup PostgreSQL documentation for details on how to set up the roles.

Also there is a new configuration keyword in the rdbms section of config.ini. The service keyword allows you to define the service name for Postgres that will be looked up in the Connection Service File. Any of the methods of specifying the file including by using the PGSERVICEFILE environment variable are supported.

This is similar to the existing support for MySQL option/config files and groups.

If you use services, any settings for the same properties (user, name, password …) that are in the tracker’s config.ini will override the service settings. So you want to leave the config.ini settings blank. E.G.:

[rdbms]
name =
host =
port =
user =
password =
service = roundup_roundup

Setting service to roundup_roundup with the following in the service file:

[roundup_roundup]
host=127.0.0.1
port=5432
user=roundup
password=roundup
dbname=roundup

would use the roundup database with the specified credentials. It is possible to define a service that connects to a specific schema using:

options=-c search_path=roundup_service_dev

Note that the first schema specified after search_path= is created and populated. The schema name (roundup_service_dev) must be terminated by: a comma, whitespace or end of line.

You can use the command psql "service=db_service_name" to verify the settings in the connection file. Inside of psql you can verify the search_path using show search_path;.

Update for user.help-search.html (optional)

There is a bug in the template used as a search helper for the user fields (e.g. the nosy list). The properties url query argument was ignored. You can not select the displayed fields using the properties argument. This is fixed in 2.4.0. You can probably just copy the user.help-search.html from the classic tracker template.

If you have modified that template, you can follow the analysis in issue2551320 to fix your template.

Update for _generic.help.html (optional)

Using the _generic.help.html template with classhelper() to provide information on a property without selecting a property caused an error when processing the template. Using the help template with Link properties can provide description or other information that the user can use to determine the right setting.

If your tracker is based on the minimal or classic tracker and you have not changed the _generic.help.html file, you can copy it into place from the template directory.

Fix static_files use of ‘-’ directory (info)

Use of the ‘-’ directory in static_files config.ini setting now works. So it will prevent access to the html directory when using @@file/ based url’s.

Bad Login Rate Limiting and Locking (info)

Brute force logins have been rate limited in the HTML web interface for a while. This was not the case with the API interfaces.

This release introduces rate limiting for invalid REST or XMLRPC API logins. As with the web interface, users who have hit the rate limit have their accounts locked until after the recommended delay time has passed. See information on configuring the API rate limits for details.

Removal of cgi.py from Python (info)

The cgi.py module will be removed starting with Python 3.13. Roundup now vendors a copy of cgi.py and makes it and its storage objects available by importing from:

from roundup.anypy.cgi_ import cgi
from roundup.anypy.cgi_ import FieldStorage, MiniFieldStorage

It is unlikely that you will care unless you have done some expert level Roundup customization. If you have, use one of the imports above if you plan on running on Python 3.13 (expected in 2024) or newer.

Fixing PostgreSQL Out of Memory Errors when Importing Tracker (info)

Importing a tracker into PostgreSQL can run out of memory with the error:

psycopg2.errors.OutOfMemory: out of shared memory
HINT:  You might need to increase max_locks_per_transaction.

before changing your PostgreSQL configuration, try changing the pragma savepoint_limit to a lower value. By default it is set to 10000. In some cases this may be too high. See the administration guide for further details.

roundup-admin’s History Command Produces Readable Output (info)

The history command of roundup-admin used to print the raw journal data. In this release the default is to produce more human readable data. The original output (not pretty printed as below) was:

[('1', <Date 2013-02-18.20:30:34.125>, '1', 'create', {}),
('1',
 <Date 2013-02-19.21:24:20.391>,
 '1',
 'set',
 {'messages': (('+', ['3']),)}),
('1', <Date 2013-02-19.21:24:24.797>, '1', 'set', {'priority': '1'}),
('1',
 <Date 2013-02-20.03:16:52.000>,
 '1',
 'link',
 ('issue', '2', 'dependson')),
('1', <Date 2013-02-21.20:51:40.750>, '1', 'link', ('issue', '2',
'seealso')),
('1',
 <Date 2013-02-22.05:33:08.875>,
 '1',
 'set',
 {'dependson': (('+', ['3']),), 'private': None, 'queue': None}),
('1',
 <Date 2013-02-22.05:33:19.406>,
 '1',
 'set',
 {'dependson': (('+', ['2']),)}),
('1',
 <Date 2013-02-27.03:24:42.844>,
 '1',
 'unlink',
 ('issue', '2', 'seealso')),
 ...

Now it produces (Each entry is on one line, lines wrapped and indented for display):

admin(2013-02-18.20:30:34) create issue
admin(2013-02-19.21:24:20) set modified messages: added: msg3
admin(2013-02-19.21:24:24) set priority was critical(1)
admin(2013-02-20.03:16:52) link added issue2 to dependson
admin(2013-02-21.20:51:40) link added issue2 to seealso
admin(2013-02-22.05:33:08) set modified dependson: added: issue3;
     private was None; queue was None
admin(2013-02-22.05:33:19) set modified dependson: added: issue2
admin(2013-02-27.03:24:42) unlink removed issue2 from seealso
...

A few things to note: set operations can either assign a property or report a modification of a multilink property. If an assignment occurs, the value reported is the old value that was there before the assignment. It is not the value that is assigned. In the example above I don’t know what the current value of priority is. All I know it was set to critical when the issue was created.

Modifications to multilink properties work differently. I know that msg3 was present in the messages property after 2013-02-19 at 21:24:20 UTC.

The history command gets a new optional argument raw that produces the old style output. The old style is (marginally) more useful for script automation.

Deprecation Notices (info)

Support for SQLite version 1 has been removed in 2.4.0.

Support for SQLite version 2 will be removed in 2.5.0.

Support for StructuredText has been removed in 2.4.0. Support for reStructuredText remains.

Support for the PySQLite library will be removed in 2.5.0. Only the Python supplied sqlite3 library will be supported.

Migrating from 2.2.0 to 2.3.0

Update your config.ini (required)

Upgrade tracker’s config.ini file. Use:

roundup-admin -i /path/to/tracker updateconfig newconfig.ini

to generate a new ini file preserving all your settings. You can then merge any local comments from the tracker’s config.ini to newconfig.ini and replace config.ini with newconfig.ini.

updateconfig will tell you if it is changing old default values or if a value must be changed manually.

Using the roundup-mailgw script (required)

In previous versions the roundup-mailgw script had a -C (or --class) option for specifying a class to be used with -S (or --set) option(s). In the latest version the -C option is gone, the class for this option is specified as a prefix, e.g. instead of

roundup-mailgw -C issue -S issueprop=value

You now specify

roundup-mailgw -S issue.issueprop=value

If multiple values need to be set, this can be achieved with multiple -S options or with delimiting multiple values with a semicolon (in that case the string needs to be quoted because semicolon is a shell special character):

roundup-mailgw -S 'issue.issueprop1=value1;issueprop2=value2'
roundup-mailgw -S issue.issueprop1=value1 -S issue.issueprop2=value2

are equivalent. Note that the class is provided as a prefix for the set-string, not for each property. The class can be omitted altogether in which case it defaults to msg (this default existed in previous versions).

If you do not use the -C (or --class) option in your current setup of mailgw you don’t need to change anything.

Replace Create User permission for Anonymous with Register (required)

Check your trackers schema.py. If you have the following code:

db.security.addPermissionToRole('Anonymous', 'Create', 'user')

after the permission for Anonymous ‘Email Access’, change it to:

db.security.addPermissionToRole('Anonymous', 'Register', 'user')

The comment for Anonymous ‘Email Access’ may refer to Create. Change it to refer to Register.

This will be an issue if you used the devel or responsive tracker templates. If you used a classic, minimal or jinja2 template the permission change (but not the comment change) should be done already.

Rdbms version change from 7 to 8 (required)

This release includes a change that requires updates to the database schema.

Sessions and one time key (otks) tables in the Mysql and PostgreSQL database use a numeric type that truncates/rounds expiration timestamps. This results in entries being purged early or late (depending on whether it rounds up or down). The discrepancy is a couple of days for Mysql or a couple of minutes for PostgreSQL.

Session keys stay for a week or more and CSRF keys are two weeks by default. As a result, this isn’t usually a visible issue. This migration updates the numeric types to ones that supports more significant figures.

You should backup your instance and run the roundup-admin -i <tracker_home> migrate command for all your trackers once you’ve installed the latest code base.

Do this before you use the web, command-line or mail interface and before any users access the tracker.

If successful, this command will respond with either “Tracker updated” (if you’ve not previously run it on an RDBMS backend) or “No migration action required” (if you have run it, or have used another interface to the tracker, or are using anydbm).

Session/OTK data storage for SQLite backend changed (required)

Roundup stores a lot of ephemeral data:

  • login session tokens,

  • rate limits

  • password reset attempt tokens

  • one time keys

  • and anti CSRF keys.

These were stored using dbm style files while the main data is stored in a SQLite db. Using both dbm and sqlite style files is surprising and due to how we lock dbm files can be a performance issue.

However you can continue to use the dbm files by setting the backend option in the [sessiondb] section of config.ini to anydbm.

If you do not change the setting, two sqlite databases called db-otk and db-session replace the dbm databases. Once you make the change the old otks and sessions dbm databases can be removed.

Note this replacement will require users to log in again and refresh web pages to save data. It is best if people save all their changes and log out of Roundup before the upgrade is done to minimize confusion. Because the data is ephemeral, there is no plan to migrate this data to the new SQLite databases. If you want to keep using the data set the sessiondb backend option as described above.

Update config.ini’s password_pbkdf2_default_rounds (required)

Roundup hashes passwords using PBKDF2 with SHA1. In this release, you can upgrade to PBKDF2-SHA512 from current PBKDF2-SHA1 (recommended). If you upgrade, you want to set the default rounds according to the PBKDF2-SHA512 upgrading directions. Note that this algorithm is expected to be the default in a future version of Roundup.

If you don’t want to upgrade, we recommend that you increase the default number of rounds from the original 10000. PBKDF2 has a parameter that makes hashing a password more difficult to do. The original 10000 value was set years ago. It has not been updated for advancements in computing power.

This release of Roundup changes the value to 2000000 (2 million). This exceeds the current recommended setting of 1,300,000 for PBKDF2 when used with SHA1.

Caution

If you were using the old 10000 value, it will be automatically upgraded to 2 million by using roundup-admin’s updateconfig. If you were not using the old 10000 default, you should update it manually.

After the change users will still be able to log in using the older 10000 round hashed passwords. If migrate_passwords is set to yes, passwords will be automatically re-hashed using the new higher value when the user logs in. If password_pbkdf2_default_rounds is set to a lower value than was used to hash a password, the password will not be rehashed so the higher value will be kept. The lower value will be used only if the password is changed using the web or command line.

Increasing the number of rounds will slow down re-hashing. That’s the whole point. Sadly it will also slow down logins. Usually the hash takes under 1 second, but if you are using a slow chip (e.g. an ARM V6 at 700 bogo mips) it can take 30 seconds to compute the 2000000 rounds. The slowdown is linear. So what takes .001 seconds at 10000 rounds will take: 2000000/10000 * .001 = 200 * .001 seconds or 0.2 seconds.

You can see how long it will take by using the new roundup-admin perftest command. After you have finished migrating your database, run:

roundup-admin -i <tracker_home> perftest password scheme=PBKDF2 rounds=10000

and then:

roundup-admin -i <tracker_home> perftest password scheme=PBKDF2 rounds=2,000,000

so see the difference. Output from this command looks like:

Hash time: 0.203151849s scheme: PBKDF2 rounds: 10000

If your testing reports a hash time above 0.5 seconds for 10000 rounds, there may be another issue. See if executing:

python3 -c 'from hashlib import pbkdf2_hmac'

produces an error.

If you get an ImportError, you are using Roundup’s fallback PBKDF2 implementation. It is much slower than the library version. As a result re-encrypting the password (and logging in, which requires calculating the encrypted password) will be very slow.

You should find out how to make the import succeed. You may need to install an OS vendor package or some other library.

Session/OTK data storage using Redis (optional)

You can store your ephemeral data in a Redis database. This provides significantly better performance for ephemeral data than SQLite or dbm files. See the section Using Redis for Session Databases in the administration guide

New SQLite databases created with WAL mode journaling (optional)

By default, SQLite databases use a rollback journal when writing an update. The rollback journal stores a copy of the data from before the update. One downside of this is that all reads have to be suspended while a write is occurring. SQLite has an alternate way of insuring ACID compliance by using a WAL (write ahead log) journal.

Version 2.3.0 of Roundup, creates new SQLite databases using WAL journaling. With WAL, a writer does not block readers and readers do not block writing an update. This keeps Roundup accessible even under a heavy write load (e.g. when bulk loading data or automated updates via REST).

If you want to convert your existing SQLite db to WAL mode:

  1. check the current journal mode on your database using:

    sqlite3 <tracker_home>/db/db "pragma journal_mode;"
    
  2. If it returns delete, change it to WAL mode using:

    sqlite3 <tracker_home>/db/db "pragma journal_mode=WAL;"
    
  3. verify by running the command in step 1 again and you should get wal.

If you are using SQLite for session and otk databases, perform the same steps replacing db with db-session and db-otk.

If you find WAL mode is not working for you, you can set the journal method to a rollback journal (delete mode) by using step 2 and replacing wal with delete. (Note: SQLite supports other journaling modes, but only wal and delete persist. Roundup doesn’t set a journaling mode when it opens the database, so journaling mode options such as truncate are not useful.)

For details on WAL mode see https://www.sqlite.org/wal.html and https://www.sqlite.org/pragma.html#pragma_journal_mode.

Change in processing allowed_api_origins setting (info)

In this release you can use both * (as the first origin) and explicit origins in the allowed_api_origins setting in config.ini. (Before it was only one or the other.)

You do not need to use *. If you do, it allows any client anonymous (unauthenticated) access to the Roundup tracker. This is the same as browsing the tracker without logging in. If they try to provide credentials, access to the data will be denied by CORS.

If you include explicit origins (e.g. https://example.com), users from those origins will not be blocked if they use credentials to log in.

Change in processing of In-Reply_to email header (info)

Messages received via email usually include a [issue23] designator in the subject line. This indicates what issue is being updated. If the designator is missing, Roundup tries to find the correct issue by using the in-reply-to email header.

The former code appends the new message to the first issue found with a message matching the in-reply-to header. Usually a message is associated with only one issue. However nothing in Roundup requires that.

In this release, the in-reply-to matching is disabled if there are multiple issues with the same message. In this case, subject matching is used to try to find the matching issue.

If you don’t have messages assigned to multiple issues you will see no change. If you do have multi-linked messages this will hopefully result in better message->issue matching.

Incremental/batch full test reindexing with roundup-admin (info)

The reindex command in roundup-admin can reindex a range of items. For example:

roundup-admin -i ... reindex issues:1-1000

will reindex only the first 1000 issues. This is useful since reindexing can take a while and slow down the tracker. By running it in batches you can control when the reindex runs rather than having to wait for it to complete all the reindexing. See the man page or administration guide for details.

Migrating from 2.1.0 to 2.2.0

Update your config.ini (required)

Upgrade tracker’s config.ini file. Use:

roundup-admin -i /path/to/tracker updateconfig newconfig.ini

to generate a new ini file preserving all your settings. You can then merge any local comments from the tracker’s config.ini to newconfig.ini and replace config.ini with newconfig.ini.

Rdbms version change from 6 to 7 (required)

This release includes two changes that require updates to the database schema:

  1. The size of words included in the Roundup FTS indexers have been increased from 25 to 50. This requires changes to the database columns used by the native indexer. This also affect the whoosh and xapian indexers.

  2. Some databases that include native full-text search (native-fts indexer) searching are now supported.

You should run the roundup-admin -i <tracker_home> migrate command for all your trackers once you’ve installed the latest codebase.

Do this before you use the web, command-line or mail interface and before any users access the tracker.

If successful, this command will respond with either “Tracker updated” (if you’ve not previously run it on an RDBMS backend) or “No migration action required” (if you have run it, or have used another interface to the tracker, or are using anydbm).

See below if you want to enable native-fts searching.

The increase in indexed word length also affects whoosh and xapian backends. You may want to run roundup-admin -i tracker_home reindex if you want to index or search for longer words in your full text searches. Re-indexing make take some time.

Check new login_empty_passwords setting (required)

In this version of Roundup, users with a blank password are not allowed to login. Blank passwords have been allowed since 2002, but 2022 is a different time. If you have a use case that requires a user to login without a password, set the login_empty_passwords setting in the web section of config.ini to yes. In general this should be left at its default value of no.

Verify that SQLite supports FTS5 (required)

If you use SQLite as your backend, it must support FTS5. See the FTS5 testing steps for how to verify this.

Check allowed_api_origins setting (optional)

If you are using the REST or xmlrpc api’s from an origin that is different from your roundup tracker, you will need to add your allowed origins to the allowed_api_origins in your updated config.ini. Upgrade your config.ini as described above then read the documentation for the setting in config.ini.

Check compression settings (optional)

Read the administration guide section on Configuring Compression.

Upgrade your tracker’s config.ini as described above. Compare the old and new files and configure new compression settings as you want. Then replace config.ini with the newconfig.ini file.

Search added to user index page (optional)

A search form and count of number of hits has been added to the user.index.html template page in the classic template. You may want to merge the search form and footer into your template.

Enhanced full-text search (optional)

SQLite’s FTS5 full-text search engine is available as is PostgreSQL’s full text search. Both require a schema upgrade so you should run:

roundup-admin -i tracker_home migrate

to create FTS specific tables before restarting the roundup-web or email interfaces.

SQLite 3.9.0+ or PostgreSQL 11.0+ are required to use this feature. When using SQLite, all full text search fields will allow searching using the MATCH query format described at: https://www.sqlite.org/fts5.html#full_text_query_syntax. When using PostgreSQL either the websearch_to_tsquery or to_tsquery formats described on https://www.postgresql.org/docs/14/textsearch-controls.html#TEXTSEARCH-PARSING-QUERIES can be used. The default is websearch. Prefixing the search with ts: enables tsquery mode.

A list of words behaves almost the same as the default text search (native). So the search string fts search will find all issues that have both of those words (an AND search) in a text-field (like title) or in a message (or file) attached to the issue.

One thing to note is that native-fts searches do not ignore words longer than 50 characters or less than 2 characters. Also SQLite does not filter out common words (i.e. there is no stopword list). So words like “and”, “or”, “then”, “with” … are included in the FTS5 search.

You must explicitly enable this search mechanism by changing the indexer setting in config.ini to native-fts. Native-fts must be explicitly chosen. This is different from Xapian or Whoosh indexers, which are chosen if they are installed in the Python environment. This prevents the existing native indexing from being discarded if indexer is not set.

Next re-index your data with roundup-admin -i tracker_home reindex. This can take a while depending on the size of the tracker.

You may want to update your config.ini by following the directions above to get the latest documentation.

See the administration guide notes on native-fts for further details.

Adding error reporting templates (optional)

Currently some internal errors result in a bare html page with an error message. The usual chrome supplied by page.html is not shown. For example query language syntax errors for full text search methods will display a bare HTML error page.

If you add an _generic.400.html template to the html directory, you can display the error inside of the layout provided by the page.html template. This can make fixing the error and navigation easier. You can use the _generic.404.html template to create a _generic.400.html by modifying the title and body text. You can test the 400 template by appending @template=400 to the url for the tracker.

Change passwords using crypt module (optional)

The crypt module is being removed from the standard library. Any stored password using crypt encoding will fail to verify once the crypt module is removed (expected in Python 3.13 see pep-0594). Automatic migration of passwords (if enabled in config.ini) re-encrypts old passwords using something other than crypt if a user logs in using the web interface.

You can find users with passwords still encrypted using crypt by running:

roundup-admin -i <tracker_home> table password,id,username

Look for lines starting with {CRYPT}. You can reset the user’s password using:

roundup-admin -i <tracker_home>
roundup> set user16 password=somenewpassword

changing 16 to the id in the second column of the table output. The example uses interactive mode (indicated by the roundup> prompt). This prevents the new password from showing up in the output of ps or shell history. The new password will be encrypted using the default encryption method (usually pbkdf2).

Enable performance improvement for wsgi mode (optional)

There is an experimental wsgi performance improvement mode that caches the loaded roundup instance. This eliminates disk reads that are incurred on each connection. In one report it improves speed by a factor of 2 to 3 times. To enable this you should add a feature flag to your Roundup wsgi wrapper (see the file .../share/frontends/wsgi.py) so it looks like:

feature_flags = { "cache_tracker": "" }
app =  RequestDispatcher(tracker_home, feature_flags=feature_flags)

to enable this mode. Note that this is experimental and was added during the 2.2.0 beta period, so it is enabled using a feature flag. If you use this and it works for you please followup with an email to the roundup-users at lists.sourceforge.net mailing list so we can enable it by default in a future release.

Hide submit button during readonly use of _generic.item.html (optional)

The submit button in _generic.item.html always shows up even when the user doesn’t have edit perms. Change the context/submit html to read:

<td colspan=3 tal:content="structure context/submit"
    tal:condition="context/is_edit_ok">

in your TAL based templates. The jinja2 based templates are missing this file, but if you implemented one you want to surround the jinja2 code with:

{% if context.is_edit_ok() %}
  <submit button code here>
{% endif %}

Migrating from 2.0.0 to 2.1.0

Rdbms version change from 5 to 6 (required)

To fix an issue with importing databases, the database has to be upgraded for rdbms backends.

You should run the roundup-admin migrate command for your tracker once you’ve installed the latest codebase.

Do this before you use the web, command-line or mail interface and before any users access the tracker.

If successful, this command will respond with either “Tracker updated” (if you’ve not previously run it on an RDBMS backend) or “No migration action required” (if you have run it, or have used another interface to the tracker, or are using anydbm).

This only changes the schema for the mysql backend. It has no effect other than upgrading the revision on other rdbms backends.

On the mysql backend it creates the database index that makes sure the key field for your class is unique.

If your update/migration fails, you will see an:

IntegrityError: (1062, "Duplicate entry '0-NULL' for key '_user_key_retired_idx'")

it means you have two non-retired members of the class with the same key field. E.G. two non-retired users with the same username.

Debug this using roundup-admin using the list command. For example dump the user class by the key field username:

$ roundup-admin -i <tracker_home> list user username
  1: admin
  2: anonymous
  3: demo
  4: agent
  5: provisional
  6: foo@example.com
  7: dupe
  8: dupe
  ...

then search the usernames for duplicates. Once you have identified the duplicate username (dupe above), you should retire the other active duplicates or change the username for the duplicate. To retire 7: dupe, you run:

roundup-admin -i <tracker_home> retire user7

(use restore user7 if you retired the wrong item). If you want to rename the entry use:

roundup-admin -i <tracker_home> set user7 username=dupe1

Keep doing this until you have no more duplicates. Then run the update/migrate again.

If you have duplicate non-retired entries in your database, please email roundup-users at lists.sourceforge.net. We are interested in how many issues this has caused. Duplicate creation should occur only when two or more mysql processes run in parallel and both of them creating an item with the same key. So this should be a rare event. The internal duplicate prevention checks should work in other cases.

For the nerds: if you had a new installation that was created at version 5, the uniqueness of a key was not enforced at the database level. If you had a database that was at version 4 and then upgraded to version 5 you have the uniqueness enforcing constraint. Running migrate updates to schema version 6 and installs the unique index constraint if it is missing.

Setuptools is now required to install (info)

Roundup install now uses setuptools rather than distutils. You must install setuptools. Use the version packgaged by your OS vendor. If your OS vendor doesn’t supply setuptools use pip install setuptools. (You may need pip3 rather than pip if using python3.)

Define Authentication Header (optional)

The web server in front of roundup (apache, nginx) can perform user authentication. It can pass the authenticated username to the backend in a variable. By default roundup looks for the REMOTE_USER variable. This can be changed by setting the parameter http_auth_header in the [web] section of the tracker’s config.ini file to a different value. The value is case sensitive. If the value is unset (the default) the REMOTE_USER variable is used.

If you are running roundup using roundup-server behind a proxy that authenticates the user you need to configure roundup-server to pass the HTTP header with the authenticated username to the tracker. By default roundup-server looks for the REMOTE_USER header for the authenticated user. You can copy an arbitrary header variable to the tracker using the -I option to roundup-server (or the equivalent option in the roundup-server config file).

For example to use the uid_variable header, two configuration changes are needed: First configure roundup-server to pass the header to the tracker using:

roundup-server -I uid_variable ....

note that the header is passed exactly as supplied by the upstream server. It is not prefixed with HTTP_ like other headers since you are explicitly allowing the header. Multiple comma separated headers can be passed to the -I option. These could be used in a detector or other tracker extensions, but only one header can be used by the tracker as an authentication header.

To make the tracker honor the new variable changing the tracker config.ini to read:

[web]
...
http_auth_header = uid_variable

At the time this is written, support is experimental. If you use it you should notify the roundup maintainers using the roundup-users at lists.sourceforge.net mailing list.

Classname Format Enforced (info)

Check schema.py and look at all Class(), IssueClass(), FileClass() calls. The second argument is the classname. All classnames must:

  • start with an alphabetic character

  • consist of alphanumerics and ‘_’

  • not end with a digit

this was not enforced before. Using non-standard classnames could lead to other issues.

jQuery updated with updates to user.help.html (recommended)

The devel and responsive templates shipped with an old version of jQuery with some security issues. It has been updated to the current version: 3.5.1. If your tracker is based on one of these templates (see the TEMPLATE-INFO.txt file in your tracker), remove the old html/jquery.js file from your tracker and copy the new jquery-3.5.1.js file from the template directory to your tracker’s html directory. Also copy in the new user.help.html file. It now references the new jquery-3.5.1.js file and also fixes a bug that prevented applying the change from the helper to the field on the main form.

Roundup-admin security stops on incorrect properties (info)

The roundup-admin ... security command used to continue running through the rest of the security roles after reporting a property error. Now it stops after reporting the incorrect property.

If run non-interactively, it exits with status 1. It can now be used in a startup script to detect permission errors.

Migrating from 1.6.X to 2.0.0

Python 2 MYSQL users MUST READ (required)

To fix issues with encoding of data and text searching, roundup now explicitly sets the database connection character set. Roundup prior to 2.0 used the default character set which was not always utf-8. All roundup data is manipulated in utf-8. This mismatch causes issues with searches and result in corrupted data in the database if it was not properly represented across the charset conversions.

This issue exists when running roundup under python 2. Note that there are more changes required for running roundup 2.0 if you choose to use python3. See Python 3 support.

In an upgraded config.ini (see next section) the [rdbms] section has a key mysql_charset set by default to utf8mb4.

It should be possible to change utf8mb4 to any mysql charset. So if you know what charset is enabled (e.g. via a setting in ~roundup/.my.cnf, or the default charset for the database) you can set it in config.ini and not need to covert the database. However the underlying issues with misconverted data and bad searches will still exist if they did before.

None of the roundup developers run mysql, so the exact steps to take during the upgrade were tested with test and not production databases.

Before doing anything else:

Backup the mysql database using mysql dump or other mysql supported tool.

Backup roundup using your current backup tool and take the roundup instance offline.

Then the following steps (similar to the conversion in needed for Python 3) should work:

  1. Export the tracker database using your current 1.6 instance:

    roundup-admin -i <trackerdir> exporttables <export_dir>
    

    replacing tracker_dir and export_dir as appropriate.

  2. Import the exported database using the new 2.0 roundup:

    roundup-admin -i <trackerdir> importtables <export_dir>
    

    replacing tracker_dir and export_dir as appropriate.

The imported data should overwrite the original data. Note it is critically important that the exporttables be done with the old tracker and the importtables be done with the new tracker. An import/export cycle between roundup 1.6.0 and roundup 2.0 has been done successfully. So the export format for 1.6 and 2.0 should be compatible.

Note that importtables is new in roundup-2.0, so you will not be able to import the result of exporttables using any 1.x version of roundup.

Following the same sequence as above using export and import should also work, but it will export all the files and messages. This will take longer but may be worth trying if the exporttables and importtables method fails for some reason.

Another way that should be faster, but is untested is to use mysql dump to dump the database. https://makandracards.com/makandra/595-dumping-and-importing-from-to-mysql-in-an-utf-8-safe-way recommends:

Note that when your MySQL server is not set to UTF-8 you need to do mysqldump –default-character-set=latin1 (!) to get a correctly encoded dump. In that case you will also need to remove the SET NAMES=’latin1’ comment at the top of the dump, so the target machine won’t change its UTF-8 charset when sourcing.

Then import the dump. Removing SET NAMES should allow the import to use UTF-8.

Please report success or issues with this conversion to the roundup-users at lists.sourceforge.net mailing list.

As people report successful or unsuccessful conversions, we will update the errata page at: https://wiki.roundup-tracker.org/ReleaseErrata.

Python 3 support (info)

Many of the .html and .py files from Roundup that are copied into tracker directories have changed for Python 3 support. If you wish to move an existing tracker to Python 3, you need to merge in those changes. Also you need to make sure that locally created python code in the tracker is correct for Python 3.

If your tracker uses the anydbm or mysql backends, you also need to export the tracker contents using roundup-admin export running under Python 2, and them import them using roundup-admin import running under Python 3. This is detailed in the documention for migrating to a different backend. If using the sqlite backend, you do not need to export and import, but need to delete the db/otks and db/sessions files when changing Python version. If using the postgresql backend, you do not need to export and import and no other special database-related steps are needed.

If you use the whoosh indexer, you will need to reindex. It looks like a database created with Python 2 leads to Unicode decode errors when accessed by Python 3. Reindexing can take a while (see details below look for “reindexing”).

Octal values in config.ini change from the Python 2 representation with a leading 0 (022). They now use a leading 0o (0o22). Note that the 0o format is properly handled under python 2. You can use the newconfig.ini generated using python3 roundup-admin -i ... updateconfig newconfig.ini if you want to go back to using python 2. (Note going back to Python 2 will require the same steps as moving from 2 to 3 except using Python 3 to perform the export.)

Rate Limit New User Registration (info)

The new user registration form can be abused by bots to allow automated registration for spamming. This can be limited by using the new config.ini [web] option called registration_delay. The default is 4 and is the number of seconds between the time the form was generated and the time the form is processed.

If you do not modify the user.register.html template in your tracker’s html directory, you must set this to 0. Otherwise you will see the error:

Form is corrupted, missing: opaqueregister.

If set to 0, the rate limit check is disabled.

If you want to use this, you can change your user.register.html file to include:

<input type="hidden" name="opaqueregister" tal:attributes="value python: utils.timestamp()">

The hidden input field can be placed right after the form declaration that starts with:

<form method="POST" onSubmit="return submit_once()"

If you have applied Erik Forsberg’s tracker level patch to implement (see: https://hg.python.org/tracker/python-dev/rev/83477f735132), you can back the code out of the tracker. You must change the name of the field in the html template to opaqueregistration from opaque in order to use the core code.

PGP mail processing (required)

Roundup now uses the gpg module instead of pyme to process PGP mail. If you have PGP processing enabled, make sure the gpg module is installed.

XMLRPC Access Role (info/required)

A new permission has been added to control access to the XMLRPC endpoint. If the user doesn’t have the new “Xmlrpc Access” permission, they will not be able to log in using the /xmlrpc end point. To add this new permission to the “User” role you should change your tracker’s schema.py and add:

db.security.addPermissionToRole('User', 'Xmlrpc Access')

This is usually included near where other permissions like “Web Access” or “Email Access” are assigned.

New values for db.tx_Source (info)

The database attribute tx_Source reports “xmlrpc” and “rest” when the /xmlrpc and /rest web endpoints are used. Check all code (extensions, detectors, lib) in trackers looking for tx_Source. If you have code like:

if db.tx_Source == "web":

or:

if db.tx_Source in ['web', 'email-sig-openpgp', 'cli' ]:

you may need to change these to include matches to “rest” and “xmlrpc”. For example:

if db.tx_Source in [ "web", "rest", "xmlrpc" ]

or:

if db.tx_Source in ['web', 'rest', 'xmlrpc', 'email-sig-openpgp', 'cli' ]:

CSV export changes (info)

The original Roundup CSV export function for indexes reported id numbers for links. The wiki had a version that resolved the id’s to names, so it would report open rather than 2 or user2;user3 rather than [2,3].

Many people added the enhanced version to their extensions directory.

The enhanced version was made the default in roundup 2.0. If you want to use the old version (that returns id’s), you can replace references to export_csv with export_csv_id in templates.

Both core csv export functions have been changed to force quoting of all exported fields. To incorporate this change in any CSV export extension you may have added, change references in your code from:

writer = csv.writer(wfile)

to:

writer = csv.writer(wfile, quoting=csv.QUOTE_NONNUMERIC)

this forces all (non-numeric) fields to be quoted and empty quotes to be added for missing parameters.

This turns exported values that may look like formulas into strings so some versions of Excel won’t try to interpret them as a formula.

Merge improvements in statusauditor.py (optional)

By default the detector statusauditor.py will change the status from “unread” to “chatting” when a second message is added to an issue. The distributed classic and jinja templates implement this feature in their copies of detectors/statusauditor.py.

This can be a problem. Consider a person sending email to create an issue. Then the person sends a followup message to add some additional information to the issue. The followup message will trigger the status change from “unread” to “chatting”. This is misleading since the person is “chatting” with themselves.

Statusauditor.py has been enhanced to prevent the status from changing to “chatting” until a second user (person) adds a message. If you want this functionality, you need to merge the distributed statusauditor.py with your tracker’s statusauditor.py. If you have not customised your tracker’s statusauditor.py, copy the one from the distibuted template. In addition to the python file, you also must copy/merge the distributed detectors/config.ini into your tracker’s detectors directory. Most people can copy detectors/config.ini from the distributed templates as they won’t have a detectors/config.ini file. (Note this is detectors/config.ini do not confuse it with the main config.ini file at the root of the tracker home.)

This enhancement is disabled by default. Enable it by changing the value in detectors/config.ini from:

chatting_requires_two_users = False

to:

chatting_requires_two_users = True

(the values no and yes can also be used). Restart the tracker to enable the change.

If you don’t do this quite right you will see one of two error messages in the web interface when you try to update an issue with a message:

Edit Error: Unsupported configuration option: Option
   STATUSAUDITOR_CHATTING_REQUIRES_TWO_USERS not found in
   detectors/config.ini.
Contact tracker admin to fix.

This happens if detectors/config.ini is not found or is missing the chatting_requires_two_users option in the statusauditor section.

If you have an incorrect value (say you use T rather than True) you see a different error:

Edit Error: Invalid value for
  DETECTOR::STATUSAUDITOR_CHATTING_REQUIRES_TWO_USERS: 'T'
Allowed values: yes, no

to fix this set the value to yes (True) or no (False).

Responsive template changes (optional)

There have been some changes to the responsive template. You can diff/merge these changes into your responsive template based tracker.

Jinja template changes (required)

Auto escaping has been enabled in the jinja template engine, this means it is no longer necessary to manually escape dynamic strings with |e, but strings that should not be escaped need to be marked with |safe (e.g. {{ context.history()|u|safe }}). Also, the i18n extension has been enabled and the template has been updated to use the extension for translatable text instead of explicit i18n.gettext calls:

{% trans %}List of issues{% endtrans %}

instead of:

{{ i18n.gettext('List of issues')|u }}

The jinja template has been upgraded to use bootstrap 4.1.3 (from 2.2.2). You can diff/merge changes into your jinja template based tracker.

Also search _generic.index.html, navigation.html and file.index.html in the html directory of your tracker. Look for:

<input type="hidden" name="@action"

where the value is a jinja expression that calls i18n.gettext. Set the value to the argument of the gettext call. E.G. replace:

<input type="hidden" name="@action" value="{{ i18n.gettext('editCSV')|u }}">

with:

<input type="hidden" name="@action" value="editCSV">

The action keywords should not be translated.

Migrating from 1.5.1 to 1.6.0

Update tracker config file

After installing the new version of roundup, you should update the config.ini file for your tracker. To do this:

  1. backup your existing config.ini file

  2. using the newly installed code, run:

    roundup-admin -i /path/to/tracker updateconfig config.ini.new
    

    to create the file config.ini.new. Replace /path/to/tracker with the path to your tracker.

  3. replace your tracker’s config.ini with config.ini.new

Using updateconfig keeps all the settings from your tracker’s config.ini file and adds settings for all the new options.

If you have added comments to your original config.ini file, merge the added comments into the config.ini.new file. Then replace your tracker’s config.ini with config.ini.new.

Read the new config.ini and configure it to enable new features. Details on using these features can be found in this section.

Make sure that user can view labelprop on classes (required)

If you have View permissions that use properties=..., make sure that the labelprop for the class is listed in the properties list.

The first one of these that exists must must be in the list:

  1. the property set by a call to setlabelprop for the class

  2. the key of the class (as set by setkey())

  3. the “name” property (if it exists)

  4. the “title” property (if it exists)

if none of those apply, you must allow

  • the “id” property

E.G. If your class does a setlabelprop(“foo”) you must include “foo” in the properties list even if the class has name or title properties.

See: reference.html setlabelprop for further details on the labelprop.

If you don’t do this, you will find that multilinks (and possibly links) may not be displayed properly. E.G. templates that iterate over a mutlilink field (with tal:repeat for example) may not show any content.

See: https://sourceforge.net/p/roundup/mailman/message/35763294/ for the initial discussion of the issue.

Fix for path traversal changes template resolution

The templates in the tracker’s html subdirectory must not be symbolic links that lead outside of the html directory.

If you don’t use symbolic links for templates in your html subdirectory you don’t have to make any changes. Otherwise you need to replace the symbolic links with hard links to the files or replace the symbolic links with the files.

This is a side effect of fixing a path traversal security issue. The security issue required a directory with a specific unusual name. This made it difficult to exploit. However allowing the use of subdirectories to organize the templates required that it be fixed.

Database back end specified in config.ini (required)

The db/backend_name file is no longer used to configure the database backend being used for a tracker. The backend is now configured in the config.ini file using the backend option located in the [rdbms] section. For example if db/backend_name file contains sqlite, a new entry in the tracker’s config.ini will need to be created:

[rdbms]

...

# Database backend.
# Default:
backend = sqlite

Once the config.ini file has been updated with the new backend option, you can safely delete the db/backend_name file.

Note: the backend_name file may be located in a directory other than db/ if you have configured the database option in the [main] section of the config.ini file to be something other than db.

Note 2: if you are using the anydbm back end, you still set it using the backend option in the rdbms section of the config.ini file.

New config file option ‘indexer’ added

This release added support for the Whoosh indexer, so a new config file option has been added. You can force Roundup to use a particular text indexer by setting this value in the [main] section of the tracker’s config.ini file (usually placed right before indexer_stopwords):

[main]

...

# Force Roundup to use a particular text indexer.
# If no indexer is supplied, the first available indexer
# will be used in the following order:
# Possible values: xapian, whoosh, native (internal).
indexer =

Errors and Troubleshooting - Full text searching not working

If after the upgrade full text searching is not working try changing the indexer value. If this is failing most likely you need to set ‘’’indexer = native’’’ to use the rdbms or db text indexing systems.

Alternatively you can do a ‘’’roundup-admin -i /path/to/tracker reindex’’’ to generate a new index using roundup’s preferred indexer from the list above.

Xapian error with flint when reindexing

If you reindex and are using xapian, you may get the error that “flint” is not supported (looks like flint was removed after xapian 1.2.x). To fix this, you can delete the full text search database located in the tracker home directory in the file ‘’’db/text-index’’’ and then perform a reindex.

Stemming improved in Xapian Indexer

Stemming allows a search for “silent” also match silently. The Porter stemmer in Xapian works with lowercase English text. In this release we lowercase the documents as they are put into the indexer.

This means capitalization is not preserved, but produces more hits by using the stemmer.

You will need to do a roundup-admin reindex if you are using the Xapian full text indexer on your tracker.

New config file option ‘replyto_address’ added

A new config file option has been added to let you control the Reply-To header on nosy messages.

Edit your tracker’s config.ini and place the following after the email entry in the tracker section:

[tracker]
...

# Controls the reply-to header address used when sending
# nosy messages.
# If the value is unset (default) the roundup tracker's
# email address (above) is used.
# If set to "AUTHOR" then the primary email address of the
# author of the change will be used as the reply-to
# address. This allows email exchanges to occur outside of
# the view of roundup and exposes the address of the person
# who updated the issue, but it could be useful in some
# unusual circumstances.
# If set to some other value, the value is used as the reply-to
# address. It must be a valid RFC2822 address or people will not be
# able to reply.
# Default:
replyto_address =

Login from a search or after logout works better (required)

The login form has been improved to work with some back end code changes. Now when a user logs in they stay on the same page where they started the login. To make this work, you must change the tal that is used to set the __came_from form variable. Note that the url assigned to __came_from must be url encoded/quoted and be under the tracker’s base url. If the base_url uses http, you can set the url to https.

Replace the existing code in the tracker’s html/page.html page that looks similar to (look for name=”__came_from”):

<input type="hidden" name="__came_from" tal:attributes="value string:${request/base}${request/env/PATH_INFO}">

with the following:

<input type="hidden" name="__came_from"
  tal:condition="exists:request/env/QUERY_STRING"
  tal:attributes="value string:${request/base}${request/env/PATH_INFO}?${request/env/QUERY_STRING}">
<input type="hidden" name="__came_from"
  tal:condition="not:exists:request/env/QUERY_STRING"
  tal:attributes="value string:${request/base}${request/env/PATH_INFO}">

Now search backwards for the nearest form statement before the code that sets __came_from. If it looks like:

<form method="post" action="#">

replace it with:

<form method="post" tal:attributes="action request/base">

or with:

<form method="post" tal:attributes="action string:${request/env/PATH_INFO}">

the important part is that the action field must not include any query parameters (‘#’ includes query params).

Errors and Troubleshooting - Unrecognized scheme in …

One symptom of failing to do this is getting an error:

Unrecognized scheme in ….

where the …. changes depending on the url path. You can see this when logging in from any screen other than the main index.

Option to make adding multiple keywords more convenient

In the classic tracker, after adding a new keyword you are redirected to the page for the new keyword so you can change the keyword’s name. This is usually not desirable as you usually correctly set the keyword’s name when creating the keyword. The new classic tracker has a new checkbox (checked by default) that keeps you on the same page so you can add a new keywords one after the other.

To add this to your own tracker, add the following code (prefixed with a +) after the entry box for the new keyword in html/keyword.item.html:

   <tr>
    <th i18n:translate="">Keyword</th>
    <td tal:content="structure context/name/field">name</td>
+   <td tal:condition="not:context/id">
+     <tal:comment tal:replace="nothing">
+       If we get here and do not have an id, we are creating a new
+       keyword. It would be nice to provide some mechanism to
+       determine the preferred state of the "Continue adding keywords"
+       checkbox. By default it is enabled.
+     </tal:comment>
+     <input type="checkbox" id="continue_new_keyword"
+           name="__redirect_to"
+           tal:attributes="value
+                           string:${request/base}${request/env/PATH_INFO}?@template=item;
+                           checked python:True" />
+     <label for="continue_new_keyword" i18n:translate="">Continue adding keywords.</label>
+   </td>
   </tr>

Note remove the leading ‘+’ when adding this to the templates.

The key component here is support for the ‘__redirect_to’ query property. It is a url which can be used when creating any new item (issue, user, keyword ….). It controls the next page displayed after creating the item. If ‘__redirect_to’ is not set, then you end up on the page for the newly created item. The url value assigned to __redirect_to must start with the tracker’s base url and must be properly url encoded.

Helper popups trigger change events on the original page

The helper popups used to set dates (from a calendar), change lists of users or lists of issues did not notify the browser that the fields had been changed. This release adds code to trigger the change event.

To add the change event to the calendar popup, you don’t need to do any changes to the tracker. It is all done in the roundup python code in templating.py.

To add the change event when updating users using the help-submit template, copy share/roundup/templates/devel/html/_generic.help-submit.html and replace your tracker’s html/_generic.help-submit.html. If you have done local changes to this file, change your file to include the code that defines the onclick event for the input field with id=”btn_apply”.

To add the change event when updating lists of issues copy share/roundup/templates/devel/html/help_controls.js to your tracer’s html directory. If you have made local changes to the javascript file, merge the two if/else blocks labeled:

/* trigger change event on the field we changed */

into your help_controls.js

html/_generic.404.html in trackers use page template

The original generic 404 error pages for many trackers did not use the standard page layout. This change replaces the html/_generic.404.html page with one that uses the page template.

If your deployed tracker is based on: classic, minimal, responsive or devel templates and has not changed the html/_generic.404.html file, you can copy in the new file to get this additional functionality.

Organize templates into subdirectories

The @template parameter to the web interface allows the use of subdirectories. So a setting of @template=view/view for an issue would use the template in the tracker’s html/view/issue.view.html. Similarly for a caller class, you could put all the templates under the html/caller directory with names like: html/caller/caller.item.html, html/caller/caller.index.html etc. You may want to symbolically link the html/_generic* templates into your subdirectory so that missing templates (e.g. a missing caller.edit.html template) can be satisfied by the _generic.edit.html template.

Properly quote query dispname (displayed name) in page.html

A new method has been added to HTMLStringProperty called url_quote. The default templates have been updated to use this in the “Your Query” section of the trackers html/page.html file. You will want to change your template. Lines starting with - are the original line and you want to change it to match the line starting with the + (remove the + from the line):

    <tal:block tal:repeat="qs request/user/queries">
-    <a href="#" tal:attributes="href string:${qs/klass}?${qs/url}&@dispname=${qs/name}"
+    <a href="#" tal:attributes="href string:${qs/klass}?${qs/url}&@dispname=${qs/name/url_quote}"
        tal:content="qs/name">link</a><br>
    </tal:block>

Find the tal:repeat line that loops over all queries. Then change the value assigned to @dispname in the href attribute from ${qs/name} to ${qs/name/url_quote}. Note that you should not change the value for tal:content.

Improvements in Classic Tracker query.edit.html template

There is a new query editing template included in the distribution at:

share/roundup/templates/classic/html/query.edit.html

This template fixes:

  • public query could not be removed from “Your Queries” once it was added. Trying to do so would cause a permissions error.

  • private yes/no dropdown always showed “yes” regardless of underlying state

  • query Delete button did not work.

  • same query being displayed multiple times

It also adds:
  • the table layout displays queries created by the user first, then available public queries.

  • public query owners are shown

  • better support for deleted queries. When a query is deleted, it is still available for those who added it to their query list. If you are the query owner, you can restore (undelete) the query. If you are not the owner you can remove it from your query list. (If a query is deleted and nobody had it in their query list, it will not show up in the “Active retired queries” section. You will have to use the class editor or roundup_admin command line to restore it.)

  • notifies the user that delete/restore requires javascript. It always did, but that requirement wasn’t displayed.

To use the new template, you must add Restore permission on queries to allow the user to restore queries (see below).

If you have not modified the query.edit.html template in your tracker, you should be able to copy the new version from the location above. Otherwise you will have to merge the changes into your modified template.

Add the query Restore permission for the User role to your tracker’s schema.py file. Place it right after the query retire permission for the user role. After the change it should look like:

p = db.security.addPermission(name='Retire', klass='query', check=edit_query,
    description="User is allowed to retire their queries")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Restore', klass='query',
    check=edit_query,
    description="User is allowed to restore their queries")
db.security.addPermissionToRole('User', p)

where the last four lines are the ones you need to add.

Usually you can add this to your User role. If all users have the User role in common then all logged in users should be ok. If you have users who do not include the User role (e.g. they may only have a Provisional role), you should add the search permission to that role (e.g. Provisional) as well if you allow them to edit their list of queries.

Also see the new search permissions for query in 1.4.17 section discussing search permission requirements for editing queries. The fixes in this release require the ability to search the creator of all queries to work correctly.

If the test script for the new search permissions for query in 1.4.17 doesn’t report that a role has the ability to search queries or at least search the creator property for queries, add the following permissions to your schema.py:

s = db.security.addPermission(name='Search', klass='query',
  properties=['creator'],
  description="User is allowed to Search queries for creator")
db.security.addPermissionToRole('User', s)

Errors and Troubleshooting - Public queries listed twice when editing

If you do not do this, public queries will be listed twice in the edit interface. Once in the “Queries I created” section and again in the “Queries others created” section of the query edit page (http..../query?@template=edit).

Fix security issues in query.item.html template

The default query.item.html template allows anybody to view all queries.

This has been updated in the classic, devel and responsive templates to only allow people to view queries they creates or queries that are publicly viewable.

If you haven’t modified you query.item.html template, simply copy the query.item.html template from one of the above default templates to your tracker’s html directory.

Enhancement to check command for Permissions

A new form of check function is permitted in permission definitions. The three argument form is still supported and will work the same as it always has (although it may be depricated in the future).

If the check function is defined as:

check(db, userid, itemid, **ctx)

the ctx variable will have the context to use when determining access rights:

ctx['property'] the name of the property being checked or None if
       it's a class check.

ctx['classname'] the name of the class that is being checked
       (issue, query ....).

ctx['permission'] the name of the permission (e.g. View, Edit...).

This should make defining complex permissions much easier. Consider:

def issue_private_access(db, userid, itemid, **ctx):
    if not db.issue.get(itemid, 'private'):
       # allow access to everything if not private
       return True

    # It is a private issue hide nosy list
    # Note that the nosy property *must* be listed
    # in permissions argument to the addPermission
    # definition otherwise this check command
    # is not run.
    if ctx['property'] == 'nosy':
       return False # deny access to this property

    # allow access for editing, viewing etc. of the class
    return True


e = db.security.addPermission(name='Edit', klass='issue',
                              check=issue_private_access,
                              properties=['nosy'],
                              description="Edit issue checks")

It is suggested that you change your checks to use the **ctx parameter. This is expected to be the preferred form in the future. You do not need to use the ctx parameter in the function if you do not need it.

Changes to property permissions

If you create a permission:

db.security.addPermission(name='View', klass='user',
   properties=['theme'], check=own_record,
   description="User is allowed to view their own theme")

that combines checks and properties, the permission also matches a permission check for the View permission on the user class. So this also allows the user to see their user record. It is unexpected that checking for access without a property would match this permission.

This release adds support for making a permission like above only be used during property permission tests. See customizing.txt and search for props_only and set_props_only_default in the section ‘Adding a new Permission’

Improve query editing

If a user creates a query with the same name as one of their existing queries, the query editing interface will now report an error. By default the query editing page (issue.search.html) displays the index page when the search is triggered. This is usually correct since the user expects to see the results of the query. But now that the code properly checks for duplicate search names, the user should stay on the search page if there is an error. To add this to your existing issue.search.html page, add the following line after the hidden field @old-queryname:

<input type="hidden" name="@template" value="index|search"/>

With this addition, the index template is displayed if there is no error, and the user stays on the search template if there is an error.

New -L (loghttpvialogger) option to roundup-server

Http request logs from roundup-server are sent to stderr or can be recorded in a log file (if -l or the logfile options is used). However there is no way to rotate the logfile without shutting down and restarting the roundup-server.

If the -L flag is used, the python logging module is used for logging the http requests. The name for the log (qualname) is ‘roundup.http’. You can direct these messages to a rotating log file by putting the following:

[loggers]
keys=roundup.http

[logger_roundup.http]
level=INFO
handlers=rotate_weblog
qualname=roundup.http
propagate=0

[handlers]
keys=rotate_weblog

[handler_rotate_weblog]
class=logging.handlers.RotatingFileHandler
args=('httpd.log','a', 512000, 2)
formatter=plain

[formatters]
keys=plain

[formatter_plain]
format=%(message)s

into a file (e.g. logging.ini). Then reference this file in the ‘config’ value of the [logging] section in the trackers config.ini file.

Note the log configuration above is an example and can be merged into a more full featured logging config file for your tracker if you wish. It will create a new file in the current working directory called ‘httpd.log’ and will rotate the log file at 500K and keep two old copies of the file.

Migrating from 1.5.0 to 1.5.1

User data visibility

For security reasons you should change the permissions on the user class. We previously shipped a configuration that allowed users to see too many of other users details, including hashed passwords under certain circumstances. In schema.py in your tracker, replace the line:

db.security.addPermissionToRole('User', 'View', 'user')

with:

p = db.security.addPermission(name='View', klass='user',
    properties=('id', 'organisation', 'phone', 'realname',
    'timezone', 'username'))
db.security.addPermissionToRole('User', p)

Note that this removes visibility of user emails, if you want emails to be visible you can add ‘address’ and ‘alternate_addresses’ to the list above.

XSS protection for custom actions

If you have defined your own cgi actions in your tracker instance (e.g. in a custom extensions/spambayes.py file) you need to modify all cases where client.error_message or client.ok_message are modified directly. Instead of:

self.client.ok_message.append(...)

you need to call:

self.client.add_ok_message(...)

and the same for:

self.client.error_message.append(...)

vs.:

self.client.add_error_message(...)

The new calls escape the passed string by default and avoid XSS security issues.

Migrating from older versions

See the historical migration document.