The Indigo, introduced as the IRIS Indigo, is a line of workstation computers developed and manufactured by Silicon Graphics, Inc. (SGI). SGI first announced the system in July 1991.[1]

Silicon Graphics Indigo
Also known asSGI IRIS Indigo
DeveloperSGI
Type3D Graphics workstation
Release date1991
Discontinued1995
PredecessorSGI IRIS 4D
SuccessorSGI Indigo2
SGI Crimson
SGI Indigo, front
SGI Indigo, back

The Indigo is one of the most capable graphics workstations of its era, and was essentially peerless in the realm of hardware-accelerated three-dimensional graphics rendering. For use as a graphics workstation, the Indigo was equipped with a two-dimensional framebuffer or, for use as a 3D graphics workstation, with the Elan graphics subsystem including one to four Geometry Engines (GEs). SGI sold a server version with no video adapter.

The Indigo's design is based on a simple cube motif in indigo hue. Graphics and other peripheral expansions are accomplished via the GIO32 expansion bus.

The Indigo was superseded generally by the SGI Indigo2, and in the low-cost market segment by the SGI Indy.

Technical specifications

edit

The first Indigo model (code-named Hollywood) was introduced on July 22, 1991. It is based on the IP12 processor board, which contains a 32-bit MIPS R3000A microprocessor soldered on the board and proprietary memory slots supporting up to 96 MB of RAM.[1][2]

The later version (code-named Blackjack) is based on the IP20 processor board, which has a removable processor module (PM1 or PM2) containing a 64-bit MIPS R4000 (100 MHz) or R4400 processor (100 MHz or 150 MHz) that implements the MIPS-III instruction set. The IP20 uses standard 72-pin SIMMs with parity, and has 12 SIMM slots for a total of 384 MB of RAM at maximum.[3]

A Motorola 56000 DSP is used for Audio IO, giving it 4-channel 16-bit audio. Ethernet is supported on board by the SEEQ 80C03 chipset coupled with the HPC (High-performance Peripheral Controller), which provides the DMA engine. The HPC interfaces primarily between the GIO bus and the Ethernet, SCSI (WD33C93 chipset) and the 56000 DSP. The GIO bus interface is implemented by the PIC (Processor Interface Controller) on IP12 and MC (Memory Controller) on IP20.

Much of the hardware design can be traced back to the SGI IRIS 4D/3x series, which shared the same memory controller, Ethernet, SCSI, and optionally DSP as the IP12 Indigo. The 4D/30, 4D/35 and Indigo R3000 are all considered IP12 machines and run the same IRIX kernel. The Indigo R3000 is effectively a reduced cost 4D/35 without a VME bus. The PIC supports a VME expansion bus (used on the 4D/3x series) and GIO expansion slots (used on the Indigo). In all IP12, IP20, and IP22/IP24 (see SGI Indigo2) systems the HPC attached to the GIO bus.

Graphics options

edit

Entry graphics

edit

For entry graphics, the 8-bit color frame buffer[4] comes in three versions. One version uses the system's GIO expansion bus. Another uses the main backplane like the XS, XZ, and Elan graphics options. The final is the same, but adds a second video output, giving the computer the ability to have two "heads", or monitors.

XS Graphics

edit

The Indigo's XS Graphics option has a single GE7 Geometry Engine (GE), a RE3 Raster engine, a HQ2 Command engine, VC1, XMAP5. It is ideal for low-cost wireframe operations, compared to more powerful, and expensive options for textured graphics.[4] Part of SGI's Express line of graphics, four XS graphics options were produced for the Indigo: the XS-8 offers 8-bit color, with one VM2 video RAM module; the XS-Z adds the ZB-4 Z buffer; the XS-24 adds two VM2 modules and offers 24 color bits and 32 bits including brightness; and the XS-24Z adds a Z buffer.

XZ Graphics

edit

The XZ graphics option is also a member of SGI's Express graphics line. It is similar to the XS-24z, but it includes a second GE7 Geometry Engine ASIC, doubling its geometry performance.

Elan Graphics

edit

The highest performance graphics option offered for the Indigo, it is a member of SGI's Express graphics line. It is like the XS-24z and XZ, but has 4 GE7 Geometry Engine ASICs, giving it twice the performance of the XZ option.[3][5]

Operating system

edit

The Indigo was designed to run IRIX, SGI's version of Unix.[2] The Indigos with R3000 processors are supported up to IRIX version 5.3, and Indigo equipped with an R4000 or R4400 processor can run up to IRIX 6.5.22.

Additionally, the free Unix-like operating system NetBSD has support for both the IP12 and IP20 Indigos as part of the sgimips port.[6]

SGI timeline

edit
SGI PrismSGI Origin 3000 and Onyx 3000Origin 2000SGI ChallengeOnyx 300Onyx 2SGI OnyxSGI CrimsonSGI AltixSGI Origin 200SGI Indigo² and Challenge MSGI TezroSGI Octane2SGI OctaneSGI Indigo² and Challenge MSGI IRIS 4DSGI FuelSGI IndigoSGI IRIS 4DSGI O2SGI O2SGI IndySGI IRIS 4DSGI IRISSGI IRISSGI IRISVisual WorkstationSGI IRISSGI IRIS
edit

The Indigo was featured in Jurassic Park as the rendering system for Samuel L. Jackson's character Arnold and his station to render graphics for Park Control Systems. It was paired to a Macintosh Quadra 700.[7]

References

edit
  1. ^ a b "sgistuff.net : Hardware : Systems : Indigo". www.sgistuff.net. Retrieved 2021-07-11.
  2. ^ a b Silicon Graphics (July 1991). "Silicon Graphics Introduces New RISC Personal Computer". sgistuff.net (Press release). Retrieved September 4, 2024.
  3. ^ a b "SGI Indigo / Silicon Graphics R4000 Architecture". www.obsolyte.com.
  4. ^ a b "Archived copy". Archived from the original on 2019-04-12. Retrieved 2014-09-20.{{cite web}}: CS1 maint: archived copy as title (link)
  5. ^ "ElanTR - Elan Graphics Technical Report". www.sgistuff.net.
  6. ^ "NetBSD/sgimips". wiki.netbsd.org. Retrieved 2021-07-11.
  7. ^ "Starring the Computer - Jurassic Park".
edit
Preceded by
SGI IRIS 4D Personal
SGI IRIS 4D Personal Succeeded by
SGI IRIS Indigo
1991 - 1995
Preceded by
SGI IRIS 4D Professional
Succeeded by