monitor

I used to use VNC, but it's not working well with VMs for some reason. I start plasma x11 in xvfb virtual screen, and then after the splash screen, I get a black screen. I'm having similar issues with RustDesk. I connect to a new screen, and get a black screen. What's your favorite way to...

Recently I stumbled across this guide which suggests Intel Integrated graphics can be passed to a VM to use the iGPU for hardware acceleration. I want to use a monitor on my Proxmox 8.2.4 running Intel i5-8500T CPU/ UHD Graphics 630 with Ubuntu VM instead of Proxmox login screen. It somewhat...

PVE 8.1.10 After some updates, rebooting of the nodes, adding new nodes - I ended up with this: When I try to remove all instances, all disappears, but then when I create new ones, also those dead duplicates create. How can I clean this?

I know that with an Ubuntu 20.04 LTS VM, I can use SPICE and have it show multiple monitors/displays with virt-manager and/or virt-viewer. Is there a way for me to do the same (or something very similar) with an Ubuntu 20.04 LTS LXC container? Your help is greatly appreciated. Thank you.

Hello, Today I added another node to the cluster. Before attaching it, I installed ceph. Ceph is version 17.2.6, while on the other nodes it is version 17.2.5. On the new server, I can't enable ceph monitor, even though when I try to do so, I get a response that everything is ok. The message...

Hi, we are seeing a really strange behavior on one of our VM. Proxmox () is showing a lot of less RAM ussage for that VM. VM RAM Config (we are not using Ballooning): VM Info: And if we go to the console and show the `free -h`: The VM has installed qemu-guest-agent. The VM OS is: The...

Hallo zusammen! Bevor ich hier in aller Ausführlichkeit schreibe, was ich schon alles probiert habe, möchte ich nur eine kurze Frage stellen. Ich habe eine Intel CPU mit Onboard-Grafik (00:02.0 VGA compatible controller: Intel Corporation GeminiLake [UHD Graphics 605] (rev 03)) und möchte sie...

Is it possible to somehow see the overall disk load, for example, how it is done in Vmware ESXi?

Hi, I've been trying to set up a MacOS Big Sur VM (Ryzen 5 1600AF, 16GB of RAM on the VM, 32 on the host, RX580 sapphire pulse) and I've almost got it to work all the way, but I can't get the passed through (and only) GPU to output to a monitor connected to the host. I've gotten everything else...

I the continuous process of learning about running an pmx environment with ceph, I came across a note regarding ceph performance: "... if running in shared environments, fence off monitor processes." Can someone explain what is meant by this and how does one achieve this? thanks!

Hello everyone, im trying to install Proxmox 7.2 VE on my HP ProLiant DL380 G6. I get into the Bootloader and after booting the Kernel i see the initsystem Output. But at the Point where Xorg with the Installation starts, my Monitor (FullHD 60Hz) goes blank and shows an "Signal out of range...

I searched a lot on the pages but found nothing interesting so decided to write a short tutorial. Virtual Flash Drive is very helpful, many systems require it instead of an iso image, and it will also come in handy for quick tests or fast move files beetwen VM. 1. We create an image of our...

Hi! Please help me. After upgrading promox from 5 to 6 and ceph from Luminous to Nautilus, I noticed 3 working and 3 non-working monitor services in gui. Are its ok to delete non-working monitor services? systemctl status ceph-mon@0.service ● ceph-mon@0.service - Ceph cluster monitor daemon...

Hi, yesterday i tried to install PVE on a Dell PowerEdge R210. Therefore i put the ISO on a bootable USB stick. After clicking "Install proxmox" on the first proxmox page the monitor became black and showed "unsupported mode". The monitor was connected with VGA on the integrated graphic card. So...

I configured GPU passthrough in Proxmox, and a VM to use the PCIe GPU. The VM is set to boot at startup. I don’t want to access the VM remotely, and I was expecting to see the VM’s GPU output directly on the Proxmox monitor. It works but with an annoying workaround. The only way to achieve...

I have a 12 node cluster, 6 at each of two location. Location one nodes use .2.0/24, the other .39.0/24 Nodes can all ping one another but when trying to create a ceph monitor on any node at the second location (.39) the error states: Multiple Ceph public networks detected on putsproxp07...

Hi all, I have attempted setting up an external VNC console for a VM using the instructions on the Wiki. This send to be either out of date of net relevant for PVE7: root@lair-pve01:/home/eroux# qm monitor 102 Entering Qemu Monitor for VM 102 - type 'help' for help qm> change vnc 0.0.0.0:100...

Hi everyone! I'm having this strange issue with Ceph on my Proxmox cluster. The *ceph* nodes have OSD, mon, mds and mgr on each of them. The *pve* nodes have only OSD on them. Recently every Saturday exactly at 06:00 (±couple minutes) ceph goes to Warning state. Logs show that one of the tree...

Im having a problem with a daemon on a 4node cluster. I initially saw that it wasnt showing up correctly in the gui (it had question mark beside it). So i tried to destroy it and it did not work. So i ended up doing this: - stopped the service manually - disabled the service - removed...

I have a monitor connected to the Nvidia card in my Proxmox box and have successfully passed it through to a Linux VM. However I find that I must also have the onboard Intel iGPU connected to the monitor for it to work (even if not switched to that input on the monitor), otherwise I just get a...