December, 2013, REV1.1
Truth Table
CTRL
Remarks
0
1
A and B Connect
A and B Dis-Connect
Typical Application Circuit
Absolute Maximum Ratings
VCC,CTRL to GND............... ........................-0.65V to +5.25V
All Other Pins to GND (Note 1)...........-0.65V to (VCC + 0.3V)
Continuous Current (A1,A2, B1,B2)…….................. ±400mA
Peak Current (,A1,A2, B1,B2)..
Continuous Power Dissipation (TA = +70°C)
8-Pin DFN (derate 15.6mW/°C above +70°C) ......1.25W
Operating Temperature Range ....................-40°C to +85°C
Storage Temperature Range......................-65°C to +150°C
Junction Temperature...............................................+150°C
Lead Temperature (soldering, 10s)...........................+300°C
(pulsed at 1ms, 10% duty cycle)..............................±500mA
Note 1: Signals onA1,A2, B1,B2 exceeding VCC or GND are clamped by internal diodes. Limit forward-diode current to maximum current
rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are
stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
Electrical Characteristics
(VCC = 2.7V to 4.2V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = 3.3V, TA = +25°C.) (Note 2)
PARAMETER
POWER SUPPLY
SYMBOL
CONDITIONS
MIN
TYP
MAX UNITS
Supply Voltage Range
VCC
ICC
1.6
5.0
1
V
VCC = 3.6V, CTRL = 0 or VCC,A1,A2, B1,B2 =
floating
Supply Current
0.02
uA
Low Ron Mode(Audio):
Analog Signal Range
On-Resistance
A1,A2, B1,B2
-2.0
VCC
1.5
V
Ω
RON
∆RON
RFLAT
IOFF
IB2=60mA, VA1, VA2 = 0 to VCC
1.0
0.2
IB1= 60mA or IB2=8mA, VA1, VA2 = 1.2v
(Note 3,4)
On-Resistance Match
On-Resistance Flatness
A1,A2,Off-Leakage Current
B1,B2 On-Leakage Current
Ω
IB1= 60mA or IB2=60mA, V A1, VA2 =
0.6,1.8v (Note 5)
0.4
Ω
VB1,VB2, VA1, VA2 = 0.6,1.8v,or floating
(Note 5)
100
100
nA
nA
50
50
ION
VB1,VB2, VA1, VA2 = floating (Note 5)
www.broadchip.com